General Products - ALP Industries Inc.

Eye & Eye TurnbuckleHG-226Eye& EyeMeets the performance requirementsof Federal Specifications FF-T-791b,Type 1, Form 1- CLASS 4, andASTM F-1145, except for those provisionsrequired of the contractor.SECTION 7 - Fittings 134• Hot dip galvanized steel.• End fittings are Quenched and Tempered, bodies heat treated by normalizing.• Turnbuckle eyes are forged and elongated, by design, to maximize easy attachment in systemand minimize stress in the eye. For turnbuckle sizes 1/4” through 2 1/2”, a shackle one sizesmaller can be reeved through eye.• Modified UNJ thread on end fittings for improved fatigue properties. Body UNC threads.• Crosby products meet or exceed all requirements of ASME B30.16 including identification,ductility, design factor, proof load and temperature requirements. Importantly, Crosbyproducts meet other critical performance requirements including fatigue life, impact propertiesand material traceability, not addressed by ASME B30.26.• TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY.• Lock Nuts available for all sizes (see Crosby Catalog.)• For comprehensive end fitting data, see Crosby Catalog.• Fatigue Rated.Thread Diameter &Take up(in.)Stock No.Galv.WorkingLoadLimit*(lbs.)Weight Each(lbs.)AJOpenKClosedMOpenDimensions (in.)**1/4X4 1031252011 500 .26 .25 11.80 7.80 12.25 8.25 .78 .34 1.75 4.00**5/16X4-1/2 1031270011 800 .45 .31 13.56 9.06 14.12 9.62 .94 .44 2.09 4.50**3/8X6 1031298011 1200 .76 .38 17.47 11.47 18.16 12.16 1.12 .53 2.52 6.001/2X6 1031314011 2200 1.54 .50 20.08 13.08 20.96 13.96 1.44 .72 3.23 6.001/2X9 1031332011 2200 1.13 .50 26.08 16.08 26.96 16.96 1.44 .72 3.23 9.001/2x12 1031350011 2200 2.14 .50 32.08 19.08 32.93 19.96 1.44 .72 3.23 12.005/8x6 1031378 3500 3.28 .63 21.93 14.68 22.93 15.68 1.75 .88 3.90 6.005/8x9 1031396 3500 2.83 .63 27.93 17.68 28.93 18.68 1.75 .88 3.90 9.005/8x12 1031412 3500 3.42 .63 33.93 20.68 34.93 21.68 1.75 .88 3.90 12.003/4x6 1031430011 5200 3.79 .75 23.88 16.38 25.12 17.62 2.09 1.00 4.69 6.003/4x9 1031458011 5200 4.61 .75 29.88 19.38 31.12 20.62 2.09 1.00 4.69 9.003/4x12 1031476 5200 5.48 .75 35.88 22.38 37.12 23.62 2.09 1.00 4.69 12.003/4x18 1031494011 5200 7.19 .75 47.88 28.38 49.12 29.62 2.09 1.00 4.69 18.007/8x12 1031519011 7200 7.22 .88 37.07 23.32 38.57 24.82 2.38 1.25 5.10 12.007/8x18 1031537011 7200 9.95 .88 49.07 29.32 50.57 30.82 2.38 1.25 5.10 18.001x6 1031555 10000 9.04 1.00 27.97 19.97 29.72 21.72 3.00 1.44 6.36 6.001x12 1031573 10000 11.50 1.00 39.97 25.97 41.97 27.72 3.00 1.44 6.36 12.001x18 1031591 10000 14.00 1.00 51.97 31.97 53.72 33.72 3.00 1.44 6.36 18.001x24 1031617 10000 17.25 1.00 63.97 37.97 65.72 39.72 3.00 1.44 6.36 24.001-1/4x12 1031635 15200 19.00 1.25 42.81 28.31 45.06 30.56 3.56 1.81 7.72 12.001-1/4x18 1031653 15200 23.00 1.25 54.81 34.31 57.06 36.56 3.56 1.81 7.72 18.001-1/4x24 1031671011 15200 27.00 1.25 66.81 40.31 69.06 42.56 3.56 1.81 7.72 24.001-1/2x12 1031699 21400 27.50 1.50 45.50 30.50 48.00 33.00 4.06 2.12 8.62 12.001-1/2x18 1031715 21400 31.00 1.50 57.50 36.50 60.00 39.00 4.06 2.12 8.62 18.001-1/2x24 1031733 21400 37.50 1.50 69.50 42.50 72.00 45.00 4.06 2.12 8.62 24.001-3/4x18 1031779 28000 52.50 1.75 57.38 39.38 60.38 42.38 4.62 2.38 10.00 18.001-3/4x24 1031797 28000 58.00 1.75 69.38 45.38 72.38 48.38 4.62 2.38 10.00 24.002x24 1031813 37000 85.25 2.00 75.69 51.69 79.19 55.19 5.75 2.69 13.09 24.002-1/2x24 1031831 60000 144.25 2.50 78.62 54.62 82.62 58.62 6.50 3.12 13.78 24.002-3/4x24 1031859 75000 194.00 2.75 81.00 57.00 85.50 64.50 7.00 3.25 15.22 24.00* Proof Load is 2.5 times the Working Load Limit. Ultimate Load is 5 times Working Load Limit.** Mechanical GalvanizedNClosedRSXClosedBBFOR MORE INFORMATION CONTACT OUR NEAREST BRANCH OFFICE