General Products - ALP Industries Inc.

205 SECTION 10 - Below-the-Hook AccessoriesModel SCP & SCPA Locking ScrewThe Model SCP and Model SCPA clamps arecapable of handling steel plate from the horizontalthrough a 180 o arc and may be used for handlingplate at rolling and forming machines. Theseclamps feature a spring loaded pivoting cam jawthat “cams in” when a load is applied to the liftingshackle.Model SCPModel SCPARated CapacityTonsPlate ThicknessInchesSCPWeight (Lbs.)SCPAWeight (Lbs.)1/2 0 - 3/4 7 81-1/2 0 - 1-1/4 13 153 0 - 2 19 246 0 - 2-1/2 44 5710 0 - 3 93 13415 0 - 4 210 312Capacities through 150 Tons and various plate thicknessesavailable upon request.Model M - LockingThe Model M is a multipurpose clamp used for positioning,sorting, erection and handling of prefabricated sections. Thesplit lower jaw enables the clamp to be particularly useful inhandling structural shapes. The Model M incorporates a“Locked Closed” feature which facilitates attaching the clampto the member being lifted and makes it an ideal horizontallocking plate clamp. It is recommended for use in pairs andsets of pairs. Handles are available in the 8 Ton model only.Model MRated CapacityTonsJaw OpeningInches1/2 0 - 13/4 - 1-1/21 0 - 13/4 - 1-1/22 0 - 1-1/41 - 24 0 - 1-1/21-1/4 - 2-1/28 0 - 21-3/4 - 3-1/2WeightLbs.78111223243638107110Available with other jaw openings for any of the above ratedcapacities.FOR MORE INFORMATION CONTACT OUR NEAREST BRANCH OFFICE