General Products - ALP Industries Inc.

Model BC Screw Adjusting Beam ClampSECTION 10 - Below- the- Hook Accessories 204The Model BC clamp:• has a 5:1 design factor• is pull tested to twice its ratedcapacity• can be side loaded to 20degrees from the vertical in alldirections• is light-weight• can also be used as a liftingclamp.Working LoadLimit @ 0 o - 20 oTonsAFlange WidthInchesBFlange ThicknessInchesCInchesDInchesEInchesFInchesGInchesHInchesWeightLbs1-1/2 3 - 7-1/2 1/4 - 5/8 11-7/8 11-3/4 3 1/2 5-3/8 5-3/4 9.53 3 - 7-1/2 1/4 - 5/8 11-7/8 12 3 5/8 5-7/16 6-3/4 13-1/25 6 - 10 1/2 - 7/8 17 14-7/8 3-1/4 3/4 6-1/2 6-3/4 22-1/2SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICEModel TL & TLA - Turning, Lifting, Lock Open, Lock ClosedThe Model TLA is a vertical lifting clamp incorporatinga “Lock Open” and a “Lock Closed” feature and anauxiliary lock. The clamp is capable of turning a steelplate from horizontal to vertical to horizontal through a180 o arc. The “Lock Open,” “lock Closed” feature facilitatesattaching and removing the clamp from the plate.The Model TL is identical to the Model TLA exceptthat it does not contain the auxiliary lock. The Model TLis capable of turning a plate from horizontal to vertical andback through the same 90 o arc.Model TL : Locking Model TLA :Auxiliary LockRated CapacityTonsPlate ThicknessInches1/2 0 - 5/81/2 - 11 0 - 3/41/2 - 12 0 - 13/4 - 1-1/24 3/16 - 1-1/41 - 26 1/4 - 1-3/81 - 2-1/88 3/8 - 1-1/21 - 2-1/812 1/2 - 2-1/22 - 4WeightLbs.91014153233363749517274142150Other Capacities and Plate Thicknesses Available Upon RequestLocked Open for easyplacement and removal.Locked Closed for LiftingFOR MORE INFORMATION CONTACT OUR NEAREST BRANCH OFFICE