General Products - ALP Industries Inc.

135 SECTION 7 - FittingsHook & Eye TurnbuckleHG-225HOOK & EYEMeets the performance requirements ofFederal Specifications FF-T-791b, Type 1,Form 1 - Class 6, and ASTM F-1145except for those provisions required of thecontractor.• Hot Dip galvanized steel• End fittings are Quenched and Tempered, bodies heat treated by normalizing• Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in systemand minimize stress in the eye. For turnbuckle sizes 1/4” through 2-1/2”, ashackle one size smaller can be reeved through the eye.• Turnbuckle hooks are forged with a greater cross sectional area that results in a strongerhook with better fatigue properties.• Crosby products meet or exceed all requirements of ASME B30.16 including identification,ductility, design factor, proof load and temperature requirements. Importantly,Crosby products meet other critical performance requirements including fatigue life,impact properties and material traceability, not addressed by ASME B30.26.• TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY.• Modified UNJ thread on end fittings for improved fatigue properties.• Body has UNC threads.• Lock Nuts available for all sizes.• Comphrehensive end fitting data provided upon request.• Fatigue Rated.ThreadDiameter &Take up(in.)Stock No.Galv.WorkingLoadLimit*(lbs.)WeightEach(lbs.)ADEClosedFJOpenDimensions (in.)**1/4 x 4 1030636 400 .29 .25 .45 1.59 1.27 11.46 7.46 12.09 8.09 .78 .34 1.75 4.00**5/16 x 4-1/2 1030654 700 .49 .31 .50 1.94 1.50 13.19 8.69 13.47 9.47 .94 .44 2.09 4.50**3/8 x 6 1030672 1000 .78 .38 .56 2.30 1.77 16.98 10.98 17.94 11.94 1.12 .53 2.52 6.001/2 x 6 1030690 1500 1.61 .50 .66 2.94 2.28 19.45 12.45 20.67 13.67 1.42 .72 3.23 6.001/2 x 9 1030716 1500 1.85 .50 .66 2.94 2.28 25.45 15.45 26.67 16.67 1.42 .72 3.23 9.001/2 x 12 1030734 1500 2.26 .50 .66 2.94 2.28 31.45 18.45 32.67 19.67 1.42 .72 3.23 12.005/8 x 6 1030752 2250 2.70 .63 .90 3.69 2.81 21.96 13.96 22.72 15.47 1.80 .88 3.90 6.005/8 x 9 1030770 2250 3.13 .63 .90 3.69 2.81 27.96 16.96 28.72 18.47 1.80 .88 3.90 9.005/8 x 12 1030798 2250 3.78 .63 .90 3.69 2.81 33.21 19.96 34.72 21.47 1.80 .88 3.90 12.003/4 x 6 1030814 3000 3.89 .75 .98 4.52 3.33 23.13 15.63 24.95 17.45 2.09 1.00 4.69 6.003/4 x 9 1030832 3000 4.61 .75 .98 4.52 3.33 29.13 18.63 30.95 20.45 2.09 1.00 4.69 9.003/4 x 12 1030850 3000 5.83 .75 .98 4.52 3.33 35.13 21.63 36.95 23.45 2.09 1.00 4.69 12.003/4 x 18 1030878 3000 6.33 .75 .98 4.52 3.33 47.13 27.63 48.95 29.45 2.09 1.00 4.69 18.007/8 x 12 1030896 4000 8.10 .88 1.13 5.19 3.78 36.53 22.78 38.66 24.91 2.38 1.25 5.10 12.007/8 x 18 1030912 4000 9.95 .88 1.13 5.19 3.78 48.53 28.78 50.66 30.91 2.38 1.25 5.10 18.001 x 6 1030930 5000 9.33 1.00 1.25 5.84 4.25 26.80 18.80 29.20 21.20 3.00 1.44 6.36 6.001 x 12 1030958 5000 11.93 1.00 1.25 5.84 4.25 38.80 24.80 41.20 27.20 3.00 1.44 6.36 12.001 x 18 1030976 5000 14.00 1.00 1.25 5.84 4.25 50.80 30.80 53.20 33.20 3.00 1.44 6.36 18.001 x 24 1030994 5000 17.25 1.00 1.25 5.84 4.25 62.80 36.80 65.20 39.20 3.00 1.44 6.36 24.001-1/4 x 12 1031010 6500 19.00 1.25 1.50 7.22 5.13 41.63 27.13 44.56 30.06 3.56 1.81 7.72 12.001-1/4 x 18 1031038 6500 23.00 1.25 1.50 7.22 5.13 53.63 33.13 56.56 36.06 3.56 1.81 7.72 18.001-1/4 x 24 1031056 6500 24.00 1.25 1.50 7.22 5.13 65.63 39.13 68.56 42.06 3.56 1.81 7.72 24.001-1/2 x 12 1031074 7500 27.50 1.50 1.88 8.34 5.75 44.72 29.72 47.72 32.72 4.06 2.12 8.62 12.001-1/2 x 18 1031092 7500 31.00 1.50 1.88 8.34 5.75 56.72 35.72 59.72 38.72 4.06 2.12 8.62 18.001-1/2 x 24 1031118 7500 37.5 1.50 1.88 8.34 5.75 68.72 41.72 71.72 44.72 4.06 2.12 8.62 24.00* Proof Load is 2.5 times Working Load Limit. Ultimate Load is 5 times Working Load Limit.** Mechanical GalvanizedKClosedMOpenNClosedRSXClosedBBFOR MORE INFORMATION CONTACT OUR NEAREST BRANCH OFFICE