General Products - ALP Industries Inc.

SECTION 10 - Below-The-Hook Accessories 196WBP-15SPECIFICATIONSModel No. WBP-7 WBP-15Length 18-1/2” 30”Width 9-1/2” 10-1/2”Height to Hook 27.8” 30”Net Weight 370 lbs. 736 lbs.The maximum rated lift is based upon lifting clean, smooth,flat, low-carbon steel, 27” or thicker with the magnet’s liftingsurface in full contact with the load.Derating is required for plates or other loads with rust or scale,loads thinner than 2”, and alloy steels.Please consult the OPERATOR’S MANUAL AND SAFETYINSRUCTIONS for more detailed ratings.Rated Lift Capacity Rounds and Flats 0-1,665 lbs. (WBP-7) and 0-3,330 lbs. (WBP-15). The special feature of this BatterBi-Polar Magnet is the unique design of pole shoe which enables it to handle a wide variety of structural shapes and rounds.Powered by its own battery, it is free of restricting cords and wires, and can also operate in areas where electric power isnot readily accessible.RECOMMENDED APPLICATIONSThis unique magnet is ideally suited for handling pipe, tubing, bar stock, billets, I beams, H beams, angles, channels, Tees,Zees and piling.Although specially designed to handle structural shapes and rounds, the Bi-Polar configuration also lifts plate, forgingsand castings.WBMThese Walker Lift Magnets are compact,mobile, self-contained batterypowered units. Operating on their ownpower sources, they are free of restrictingcords and wires and have the furtheradvantage of being usable in areaswere electric power is not available.The WBM-13 is a new, compactmodel for general utility lifting. TheWBM-36 has a special shoe design forplate lifting. WBM-13, WBM-25 andWBM-36 are all single units. TheWBM-50 is two magnets on an adjustablespreader beam operated from asingle battery pack.RECOMMENDED APPLICATIONSThese versatile Walker magnets have widespreadapplication for handling of plates, die blocks,machined components, smooth castings and forgings.These Battery Powered Magnets are extremelyuseful throughout any plant, around the yard, receivingand shipping areas, storeroom, cut-off saws, burningand welding tables, and machine tools such asgrinders, millers, shapers, drill presses, etc.One IR Remote Transmitter Suppliedwith each WBM - WBP MAGNET.PERFORMANCE RATING ON AISI 1020 STEELModelWBM-13WBM-25WBM-36WBM-50SPECIFICATIONSRated Lift0-3000 lbs.0-5500 lbs.0-8000 lbs.0-11000 lbs.Model No. WBM-13 WBM-25 WBM-36 WBM-50Length 16.3” 21” 48” 60”Width 8.6” 9.6” 9.6” 12”Height to 22.4” 22.6” 22.8” 23”crane hookNet Weight 165 lbs. 295 lbs. 530 lbs. 640 lbs.ShippingWeight175 lbs. 310 lbs. 550 lbs. 690 lbs.FOR MORE INFORMATION CONTACT OUR NEAREST BRANCH OFFICE