General Products - ALP Industries Inc.

SECTION 14- Tools & Miscellaneous 234Haven GripsDesigned for use when light, compact grip is desired and where conductordamage is not a factor. Gripping pressure of the knurled jaw isapplied to 1/4”(6.35mm) cable area. 1604-20L and 1625 series have aswing latch to help hold cable in the jaw.Cat. No.Minimum CableSize-Inches (MM.)Maximum Cable Size-Inches (MM.)WARNING: Do not exceed rated capacity.Maximum SafeLoad- lbs (kg)WARNING: Before each use clean jaw area andinspect grip for proper operation to avoidslippage.Approx. WeightEach- lbs (kg)1604-10 14 B&S.06 (1.52) 2 B&S.25 (6.35) 2500 (1136) 1 (.45)160420L000 8B&S.125 (3.18) Steel Strand.50 (12.70) 5000 (2272) 2-1/2 (1.14)Cat No.Minimum CableSize-Inches (MM.)MaximumCable Size-Inches (MM.)1604-20L 8 B&S.125 (3.18) Steel Strand.50(12.70)Cat. No.Minimum CableSize-Inches (MM.)Maximum Cable Size-Inches (MM.)Maximum SafeLoad- lbs (kg)Approx. WeightEach- lbs (kg)5000 (2272) 2-1/2 (1.14)Maximum SafeLoad- lbs (kg)Approx. WeightEach- lbs (kg)1625200000 1 B&S.28 (7.11) Wire Rope.75(19.05) 8000(3636) 3-1/2 (1.59)1625-20 7/8 .38 (9.65) Wire Rope.88 (22.35) 8000(3636) 3-1/2 (1.59)1625201000 .50 (12.70) Wire Rope 1.00(25.40)8000(3636) 3-1/2 (1.59)Diameters of American (AWG) of Brown &Sharpe (B&S) Wire GaugesNo. of WireGaugeAmerican(AWG) orBrown & Sharpe(B&S) -inchesNo. of WireGaugeAmerican(AWG) or Brown& Sharpe (B&S)-inches0000 .460 21 .028462000 .40964 22 .02534700 .3648 23 .225710 .32486 24 .020125 .01791 .28932 .25763 26 .015943 .22942 27 .0141954 .20431 28 .0126415 .18194 29 .01125730 .0100256 .162027 .14428 31 .0089288 .12849 32 .007959 .11443 33 .0070810 .10189 34 .00630435 .00561411 .09074212 .080808 36 .00513 .071961 37 .00445314 .064084 38 .00396515 .057068 39 .00353140 .00314416 .0508217 .04525718 .04030319 .0358920 .031961CAUTION:Proper maintenance and field inspection of allgrips is necessary before each use.• Check to be sure there is no accumulation offoreign material in the jaws which mightcause slippage. Use Cat. No. 25450 wirebrush set.• Check mechanical condition of entire grip.• Check grip to be sure it is the correct size andtype for the application.• Clean and lubricate. DO NOT lubricate grippingsurfaces of jaws.• Check all parts for distortion or misalignment.WARNING: Always match proper size and typegrip to application.WARNING: When used on/or near energized lines,ground, insulate, or isolate grip before pulling.FOR MORE INFORMATION CONTACT OUR NEAREST BRANCH OFFICE