General Products - ALP Industries Inc.

More documents

Recommendations

Info

171 SECTION 9 - Hoists, Pullers & WinchesEconomy HoistsManual Chain HoistAMH Hand Chain Hoists offer the ideallifting solution from 1/4 to 30 metric toncapacity for construction and maintenanceapplications where portability andeasy rigging are critical.• <strong>Inc</strong>reased efficiency on MA series by sealedball bearings on the chain wheel, additionalpinion shaft bearing and close tolerances.• Bolted Hook blocks allowing completehook inspection per ASME B30 safetycodes (Except MM003 is riveted)• Lightweight and Durable all steel constructionwith powder coated finish and platedexternal components to resist corrosion.• Zinc plated load chains are premium Grade80 alloy manufactured in EU or Japan.• Operation from any angle below due toradius hand chain cover.• Double pawl disc type mechanical load brake is Self adjustingand insures positive load control (MM003 has single pawl)• Double roller chain guide insures tracking and is open for inspectionand cleaning of debris• Optional Overload Protection (V) is by one directional clutchthat will only slip in the lift direction insuring that any loadlifted can be lowered. (Not available on MM003)• Meets: ASME/ANSI B30.16, OSHA, NASA-STD-8719.9, EUDirectives: 98/37/EC and ATEX rated II 3 GD c IIB 50 C Xfor limited use in Hazardous EnvironmentsCapacity Model/Pin #Manual Chain HoistsHeadroomMin.(In.)Pull @ WLLAvg.(Lbs)Net Weight (Lbs)Extra 8/10FtLift/Ft LiftLbs. Tons 8 Ft. Lift Falls550 1/4t MM003-08-06 1 9.1 26 0.44 7.710 Ft Lift1100 1/2t MA005-10-08 1 13.8 56 0.74 202200 1t MA010-10-08 1 15.1 64 0.92 263300 1.5t MA015-10-08 1 17.4 69 1.12 364400 2t MA020-10-08 1 19.1 77 1.30 446600 3t MA030-10-08 1 21.8 84 1.88 728800 4t MA040-10-08 2 27.1 67 2.88 9311000 5t MA050-10-08 2 27.1 84 2.88 9313200 6t MA060-10-08 3 27.2 66 4.13 13616500 7.5t MA075-10-08 3 27.2 83 4.13 136*Notes: Additional lift and hand chain lengths can be specified. The standard hand chain drop is2 Ft. less than lift. 15 Ft. & 20 Ft. Lifts also standards.Lever Chain HoistAMH Hand Chain Hoists offer1/4 to 10 Ton capacities of ruggedconstruction having 360 handleoperation and free chaining for easyrigging and in tight places. Ideallysuited for lifting or pulling duringconstruction and maintenance operationswhere access is limited.• More Capacity for more work andbetter value• Bolted Hook blocks allowing completehook inspection per ASMEB30 safety code (ML003 andML005 are riveted)• Lightweight and Durable all steel construcion with powdercoated finish and plated external components to resist corrosion.• Zinc plated load chains are premium Grade 80 alloy made in EUor Japan• Horseshoe shape chain guide allows operation in any orientation• Double pawl disc type mechanical load brake is Self adjustingand insures positive load control (ML003 and ML005 are singlepawl)• Optional Overload Protection (V) is by one directional clutchthat will slip in the lift direction insuring that any load lifted canbe lowered. (Not avaialble on ML003 and ML005)• Meets: ASME/ANSI B30.21, OSHA, NASA-STD-8719.9 EUDirectives: 98/37/EC and ATEX rated Ex II 3 GD c IIB 50 oC X for limited use in Hazardous EnvironmentsLever Chain HoistsWLL Capacity Model/Pin # Model/Pin#HeadroomHandleLengthPull @WLLNet Weight(Lbs)Max US Metric Min.Falls Min. Lg. Avg. Extra 10 FtLbs. Tons Tons Lbs (1) 5 Ft. Lift 10 Ft. Lift (In.) (In.) (Lbs) Lift/Ft Lift550 1/4* 0.25 33 ML003-05 ML003-10 1 8.5 6.2 28 0.25 4.41100 1/2* 0.5 44 ML005-05 ML005-10 1 10.0 7.1 40 0.36 7.71760 3/4* 0.8 44 LA008-05 LA008-10 1 13.4 10.5 47 0.54 14.92200 1* 1.0 44 LA010-05 LA010-10 1 13.4 12.1 51 0.54 15.33750 1-3/4 1.6 70 LA016-05 LA016-10 1 15.7 14.0 66 0.74 24.14500 2-1/4 2.0 88 LA020-05 LA020-10 1 18.1 14.0 66 0.92 36.25500 2-3/4 2.5 110 LA025-05 LA025-10 1 19.1 14.0 74 1.25 37.97000 3-1/2 3.2 141 LA032-05 LA032-10 1 19.1 14.0 74 1.25 37.914000 7 6.3 278 LA063-05 LA063-10 2 25.2 16.5 74 3.00 66.320000 10 9.0 396 LA090-05 LA090-10 3 28.7 16.5 76 4.50 110.6Notes: 1. Min capacity is the load required to set the automatic brake.2. Additiona lifts are available. - 15 ft & 20 ft lifts are also considered standard.FOR MORE INFORMATION CONTACT OUR NEAREST BRANCH OFFICE
Trolleys & Other AccessoriesCTA Plain & Geared TrolleysSECTION 9 - Hoists, Pullers & Winches 172COFFING CT Model - Featuring enhanced design, and available in plain and geared models which can be modified to fit a wide range ofbeam sizes and styles. The CTA is designed to provide easy operation and superior performance in industrial lifting applications.• CAPACITIES -Rated loads from 1/4 to 5 Tons in plain and geared models. Geared trolleys have standard 6-foot hand chain drop. Other hand chain drops available.• RUGGED- Designed to provide superior performance and long, efficient service.• EASY OPERATION- Lowest rolling effort of Coffing trolley lines.• UNIVERSAL MOUNTING- Clevis accepts all Coffing hook-mounted hoists, or lug-mounted hoists attachdirectly to load pins.• ADJUSTABLE- Trolley easily adjusts to fit any beam flange within range of adjustment.• WRAP-AROUND SIDE PLATES- Act as safety lugs to increase operator safety act as bumpers to protectwheels.• DUAL TREAD WHEELS - Fully machined wheels fit any taper or flat flanged beams within the range ofadjustment. Wheels include permanently lubricated, shielded ball bearings for long life and low maintenance.• OPTIONS- Spark resistant and corrosion resistant wheels available. Track clamps available on 1/4 to 4 Tonmodels.• LIFETIME WARRANTYCapacityStandard I-Beam Minimum Net WeightLbs.TonsModelNumberBeamHeightWidth(In.)RadiusCurves (In.)Plain (P)(Lbs.)Geared (G)(Lbs.)500 1/4 CT-05P(G) 6-18 3.33-7.00 48 46 521000 1/2 CT-10P(G) 6-18 3.33-7.00 48 46 522000 1 CT-20P(G) 6-18 3.33-7.00 48 46 524000 2 CT-40P(G) 6-18 3.33-7.00 48 46 526000 3 CT-60P(G) 6-18 3.33-7.00 48 46 528000 4 CT-80P(G) 8-18 3.33-7.00 ** 125 13010000 5 CT-100P(G) 8-18 3.33-7.00 ** 125 130*When ordering, specify 'P” for plain trolley or “G” for geared trolley.** Standard model for straight track only. Articulating model for 4-foot minimum radius curve available- consult factory.CBT Plain & Geared TrolleysCapacity*COFFING CBT Models - Available in plain and geared models, the CBT is the economicalchoice for most applications. The trolley features steel wrap around side plates,dual tread wheels and lifetime lubricated shielded ball bearings. All CBT’s features combineto ensure you a trolley that is smooth rolling, versatile and reliable.• CAPACITES- Rated loads from 1/4 to 5 Tons (Metric Rated). In plain and geared models.• ECONOMICAL- Excellent low cost choice for most manual and light-duty powered applications.• RUGGED - Designed to provide superior performance and long, efficient service.• LOW ROLLING EFFORT - Geared models have standard 6-foot hand chain drop. Other handchain drops available.• UNIVERSAL HANGING CLEVIS- Accepts most hook-mounted hoists.• ADJUSTABLE- Trolley easily adjusts to fit any beam flange within range of adjustment, up to an8.7” flange width.• WRAP-AROUND SIDE PLATES- Lugs provide additional security to increase operatorsafety and act as bumpers to protect wheels.• DUAL TREAD WHEELS- Will fit any tapered or flat beam flange within range of adjustment.Wheels include permanently lubricated, shielded ball bearings for long life and low maintenance.• LIFETIME WARRANTYModelNumber**Beam Height (In.) I-Beam Width (In.) Minimum RadiusCurves (In.)Wheel TreadDiameter (In.)Net Weight(Lbs.)Lbs.Tons500 1/4 CBTP-0025 4 -24 2.0 - 8.7 27 2.36 191000 1/2 CBTP-0050 4 - 24 2.0 - 8.7 27 2.36 192000 1 CBTP(G)-0100 5 - 24 2.3 - 8.7 36 2.36 263000 1-1/2 CBTP(G)-0150 6 - 24 2.3 - 8.7 45 3.15 464000 2 CBTP(G)-0200 6 - 24 2.3 - 8.7 45 3.15 466000 3 CBTP(G)-0300 8 - 24 3.0 - 8.7 55 4.41 8610,000 5 CBTP(G)-0500 10 - 24 3.5 - 8.7 70 4.92 130* Metric Rated** When ordering, specify “P” for plain trolley or “G” for geared trolleyFOR MORE INFORMATION CONTACT OUR NEAREST BRANCH OFFICE
Page 2 and 3:
Corporate HistoryIn 1981 Reitzel Sw
Page 4 and 5:
TABLE OF CONTENTSWIRE ROPEGeneral I
Page 6 and 7:
1 SECTION 1 - Wire RopeWIRE ROPEGen
Page 8 and 9:
3 SECTION 1 - Wire Ropebeen applied
Page 10 and 11:
5 SECTION 1 - Wire Ropeends will be
Page 12 and 13:
7 SECTION 1 - Wire RopeTroubleshoot
Page 14 and 15:
9 SECTION 1 - Wire RopeSuggested Wi
Page 16 and 17:
11 SECTION 1 - Wire RopeRopesWire R
Page 18 and 19:
13 SECTION 1 - Wire RopeSix Strand
Page 20 and 21:
15 SECTION 1 - Wire RopeRotation Re
Page 22 and 23:
17 SECTION 1 - Wire RopeGalvanized
Page 24 and 25:
19 SECTION 1 - Wire RopeBethlehem8-
Page 26 and 27:
21 SECTION 1 - Wire RopeBridonEndur
Page 28 and 29:
23 SECTION 1 - Wire RopeBridonEndur
Page 30 and 31:
25 SECTION 1 - Wire RopeWireco7-FLE
Page 32 and 33:
27 SECTION 1 - Wire RopeSling Capac
Page 34 and 35:
29 SECTION 1 - Wire RopeSling Capac
Page 36 and 37:
31 SECTION 1 - Wire RopeTerminal Ef
Page 38 and 39:
33 SECTION 2 - Elevator ProductsBet
Page 40 and 41:
35 SECTION 2 - Elevator ProductsBet
Page 42 and 43:
37 SECTION 2 - Elevator ProductsRee
Page 44 and 45:
39 SECTION 2 - Elevator ProductsGov
Page 46 and 47:
41 SECTION 2 - Elevator ProductsWir
Page 48 and 49:
43 SECTION 3 - ChainCHAINTypes of C
Page 50 and 51:
45 SECTION 3 - ChainWelded Single C
Page 52 and 53:
47 SECTION 3 - ChainWelded Quadrupl
Page 54 and 55:
49 SECTION 3 - ChainCrosby ELIMINAT
Page 56 and 57:
51 SECTION 3 - ChainKuplex ® II Ku
Page 58 and 59:
53 SECTION 3 - ChainCrosby ® Grade
Page 60 and 61:
55 SECTION 3 - ChainCrosby 8/10 TM
Page 62 and 63:
57 SECTION 3 - ChainA-1355 Chain Ch
Page 64 and 65:
59 SECTION 3 - ChainRecommended Cha
Page 66 and 67:
61 SECTION 3 - ChainTable of WearCh
Page 68 and 69:
63 SECTION 3 - ChainGrade 70 Transp
Page 70 and 71:
65 SECTION 3 - ChainBinders & Chain
Page 72 and 73:
67 SECTION 4 - Mesh SlingsAlloy Cha
Page 74 and 75:
69 SECTION 5 - Synthetic SlingsCons
Page 76 and 77:
71 SECTION 5 - Synthetic SlingsSaf-
Page 78 and 79:
73 SECTION 5 - Synthetic SlingsPenc
Page 80 and 81:
75 SECTION 5 - Synthetic SlingsWeb
Page 82 and 83:
77 SECTION 5 - Synthetic SlingsTypi
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
83 SECTION 5 - Synthetic SlingsBrai
Page 90 and 91:
85 SECTION 6 - Cargo ControlCARGO C
Page 92 and 93:
87 SECTION 6 - Cargo ControlSafety
Page 94 and 95:
89 SECTION 6 - Cargo ControlBuckle
Page 96 and 97:
91 SECTION 6 - Cargo ControlWinches
Page 98 and 99:
93 SECTION 6 - Cargo ControlFlat Ho
Page 100 and 101:
95 SECTION 6 - Cargo Control“E”
Page 102 and 103:
97 SECTION 7 - FittingsG-450 Crosby
Page 104 and 105:
99 SECTION 7 - FittingsG-429 Crosby
Page 106 and 107:
101 SECTION 7 - FittingsG-340 & S-3
Page 108 and 109:
103 SECTION 7 - FittingsScrew Pin S
Page 110 and 111:
105 SECTION 7 - FittingsRound Pin S
Page 112 and 113:
107 SECTION 7 - FittingsLarge Bolt
Page 114 and 115:
109 SECTION 7 - FittingsS-320 & s-3
Page 116 and 117:
111 SECTION 7 - FittingsShank HookS
Page 118 and 119:
113 SECTION 7 - FittingsSHUR-LOC ®
Page 120 and 121:
115 SECTION 7 - FittingsS-4320 HOOK
Page 122 and 123:
117 SECTION 7 - FittingsSS-4055 Saf
Page 124 and 125:
119 SECTION 7 - FittingsSpecialty H
Page 126 and 127: 121 SECTION 7 - FittingsThimblesExt
Page 128 and 129: 123 SECTION 7 - FittingsSlip-Thru T
Page 130 and 131: 125 SECTION 7 - FittingsWedge Socke
Page 132 and 133: 127 SECTION 7 - FittingsClosed Spel
Page 134 and 135: 129 SECTION 7 - FittingsCLOSED SWAG
Page 136 and 137: 131 SECTION 7 - FittingsTurnbuckles
Page 138 and 139: 133 SECTION 7 - FittingsJaw & Eye T
Page 140 and 141: 135 SECTION 7 - FittingsHook & Eye
Page 142 and 143: 137 SECTION 7 - FittingsSwivelsEqui
Page 144 and 145: 139 SECTION 7 - FittingsHoist Rings
Page 146 and 147: 141 SECTION 7 - FittingsHeavy Duty
Page 148 and 149: 143 SECTION 7 - FittingsEZ-Torque T
Page 150 and 151: 145 SECTION 7 - FittingsElectroline
Page 152 and 153: 147 SECTION 7 - FittingsTYPICAL ASS
Page 154 and 155: 149 SECTION 7 - FittingsCable SizeN
Page 156 and 157: 151 SECTION 7 - FittingsNicopress T
Page 158 and 159: 153 SECTION 7 - FittingsStainless S
Page 160 and 161: 155 SECTION 8 - BlocksBLOCKSWire Ro
Page 162 and 163: 157 SECTION 8 - BlocksDiamond & Ova
Page 164 and 165: 159 SECTION 8 - BlocksCrane Blocks#
Page 166 and 167: 161 SECTION 8 - BlocksOverhaul Ball
Page 168 and 169: 163 SECTION 8 - BlocksTackle Block
Page 170 and 171: 165 SECTION 9 - Hoists, Pullers & W
Page 184 and 185: 179 SECTION 10 - Below-the-Hook Acc
Page 212 and 213: 207 SECTION 11 -CordageNylonBlue St
Page 214 and 215: 209 SECTION 11 -CordageRope Use Ref
Page 216 and 217: 211 SECTION 12 - Fall RestraintUniv
Page 218 and 219: 213 SECTION 12 - Fall RestraintSusp
Page 220 and 221: 215 SECTION 13 - Marine ProductsMAR
Page 222 and 223: 217 SECTION 13 - Marine ProductsLig
Page 224 and 225: 219 SECTION 13 - Marine ProductsCha
Page 226 and 227:
221 SECTION 13 - Marine ProductsDet
Page 228 and 229:
223 SECTION 13 - Marine ProductsDJM
Page 230 and 231:
225 SECTION 13 - Marine ProductsCle
Page 232 and 233:
227 SECTION 13 - Marine ProductsPat
Page 234 and 235:
229 SECTION 14- Tools & Miscellaneo
Page 236 and 237:
Page 238 and 239:
Page 240 and 241:
Page 242 and 243:
show all

General Products - ALP Industries Inc.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?