V900E VER SERIES

More documents

Recommendations

Info

Gearmotor, encoder and transformer (only for possibile maintenance) ENGLISHCommand and safety devicesStop button (N.C. contact) - Stops movement, excludes the automatic closing functions.To restart the automated kit, press a command button or a remote control button.Key and/or push button selector switch (N.O. contact) - Opening and closing devices.Command modes: open-stop-close-stopN.C. Contact for “reopening during closing”- Input for photocells, sensitive profi les and other devicescomplying with EN 12978 standards.During the closing phase, operating the device will invert themotion until complete opening is achieved.BROWNTransformerBROWNBLACKREDWHITEIf a button is connected, thenremove the fuse-bridge.If a button is connected, thenremove the fuse-bridge.RXGREENREDWHITEBROWN TX GREENGearmotor24V d.c. withencoderThe data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users.12
Warning devices The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users. 6.4 Function selection Movement Flasher (contact capacity:24V – 25W max.)Flashes during the opening andclosing phases.1 ON – Encoder programming - activates the opening and closing end-stops adjustment procedure.2 deactivated. Keep the dip-switch in OFF position6.5 AdjustmentsONOFFTrimmer SLOW.SENS. = Adjusts the amperometric sensitivity that controls the force of the engine developed during differentphases, slow-down; if said force becomes greater than the adjusted level, the system intervenes by inverting the direction ofmovement.Trimmer A.C.T. = Adjusts the waiting time in the opening position. Once this time frame has lapsed, an automatic closingprocedure is performed. The waiting time may be adjusted to between 1 second and 120 seconds. Adjusting to the minimumexcludes the automatic closing function.ENGLISHTrimmer CL.SENS. = Adjusts the amperometric sensitivity that controls the force of the engine developed during movementclosing; if said force becomes greater than the adjusted level, the system intervenes by inverting the direction of movement.Trimmer OP.SENS. = Adjusts the amperometric sensitivity that controls the force of the engine developed during movementopening; if said force becomes greater than the adjusted level, the system intervenes by inverting the direction of movement.13
Page 1 and 2: AUTOMATION FOR SECTIONAL ANDOVERHEA
Page 3 and 4: The data and information reported i
Page 5 and 6: 5.3 Cable list and minimum thicknes
Page 7 and 8: 5.6 Fastening the transmission guid
Page 9 and 10: 5.8 Fastening the gearmotor to the
Page 11: 6.2 Main componentsThe data and inf
Page 15 and 16: ...then briefly press the ENC/RADIO
Page 17 and 18: TransmittersTOP SERIESThe data and
Page 19 and 20: T264M - T304MT2622M - T3022MThe dat
Page 21 and 22: 11 Manufacturer’s warrantyMANUFAC

V900E VER SERIES

Create successful ePaper yourself

Delete template?

Save as template?