V900E VER SERIES

More documents

Recommendations

Info

QUARZ TOP <strong>SERIES</strong>Common coding operations for transmitters:ENGLISH1 note down the selected code (for future need)2 insert the J coding jumper to activate the procedure3 memorise the code, pressing P1 and/or P2 in the above sequence.At the end, a double sound will confirm the memorisation.4 remove the J jumperFIG.AP1 = CH1P2 = CH2FIG.BThe fi rst coding must be made leaving the C jumpers in the position shown in fi gA. For any other coding operations on other channels position the C jumpers asshown in fi g. B.P1 = CH1 - P2 = CH3P1 = CH1 - P2 = CH4TOPT262M - T302MP1 = CH3 - P2 = CH2P1 = CH3 - P2 = CH4The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users.18
T264M - T304MT2622M - T3022MThe data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users. P1 = CH1P2 = CH2P3 = CH3P4 = CH4 Memorisation1) Keep the ENC/RADIO pressed on the circuit board. The led indicator will fl ash. 2) press the transmitter button to be memorised. The led indicator will stay on to confi rm memorisation. 1° CodeP1 = CH1P2 = CH2 2° CodeP3 = CH1P4 = CH2ENC/RADIOLED flashLED litRadiofrequecy cardENGLISHN.B.: to change the code, repeat the procedure described.19
Page 1 and 2: AUTOMATION FOR SECTIONAL ANDOVERHEA
Page 3 and 4: The data and information reported i
Page 5 and 6: 5.3 Cable list and minimum thicknes
Page 7 and 8: 5.6 Fastening the transmission guid
Page 9 and 10: 5.8 Fastening the gearmotor to the
Page 11 and 12: 6.2 Main componentsThe data and inf
Page 13 and 14: Warning devices The data and i
Page 15 and 16: ...then briefly press the ENC/RADIO
Page 17: TransmittersTOP SERIESThe data and
Page 21 and 22: 11 Manufacturer’s warrantyMANUFAC

V900E VER SERIES

Create successful ePaper yourself

Delete template?

Save as template?