V900E VER SERIES

More documents

Recommendations

Info

5.7 Fastening the guide arm to the transmission guide1) Fasten the guide arm to the top of the door frame, perpendicularly to the transmission guide. Use the supplied rivets andother suitable bolts and screws.ENGLISH2) Release the traction slide by turning the small level clockwise.Move the slide towards the door and hook it onto the guide arm with the supplied bolt.UNI 5739M6 x 20The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users.8
5.8 Fastening the gearmotor to the transmission guide1) Remove the cover of the motor unit.The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users.UNI 6954 ø 3.9 x 132) Fasten the motor unit to guide’s support racket using the three screws supplied with the kit.N.B.: if needed, the unit may be fasten in the other three perpendicular positions, as per the drawings.UNI 6955 ø 6.3 x 453) Affi x the cable gland in the hole used to convey the electrical cables.ENGLISH9
Page 1 and 2: AUTOMATION FOR SECTIONAL ANDOVERHEA
Page 3 and 4: The data and information reported i
Page 5 and 6: 5.3 Cable list and minimum thicknes
Page 7: 5.6 Fastening the transmission guid
Page 11 and 12: 6.2 Main componentsThe data and inf
Page 13 and 14: Warning devices The data and i
Page 15 and 16: ...then briefly press the ENC/RADIO
Page 17 and 18: TransmittersTOP SERIESThe data and
Page 19 and 20: T264M - T304MT2622M - T3022MThe dat
Page 21 and 22: 11 Manufacturer’s warrantyMANUFAC

V900E VER SERIES

Create successful ePaper yourself

Delete template?

Save as template?