Welcome to Onyx-RAD - Viztek

Acquiring Orex Images : Step by StepStep 1 : Ensure Scanner is turned onEnsure the Orex CR scanner is turned on. If it is not, pleaseturn it on. (The power switch is located on the back of thescanner, and powering up may take from 20 seconds to 60seconds. Some Orex CR scanners, especially the newer“auto cassette” models, may take a few seconds before theyrespond to the power switch being flipped on, so please bepatient. This delay is due to the scanner running internaldiagnostic tests.)Step 2 : Start Workstation (if not alreadyrunning)If the Onyx-RAD Orex QC Workstation application is notalready running, start it by double-clicking (with the leftmouse button) the icon titled “Onyx-RAD Orex QCWorkstation.”Step 3 : Log On (optional)(optional) If your Workstation has not been set up toautomatically log you in to the database for securityreasons, you will need to do so manually. To do so, click onthe “File” menu and choose “Log On” (or you can click thelightning bolt icon.) Enter your user name and password inthe dialog box that appears, and choose your database fromthe drop-down list.Onyx-RAD is a registered trademark of Viztek, Inc. © 1995-2002 Page 137