Welcome to Onyx-RAD - Viztek

To add a route:Click the node to add a default route from, in most casesyou will click the entry titled “DEFAULT.” Click the “AddNew Route” button.☼ Keep in mind thatyou must havealready created aContact Entry (usingContact Editor).On the right side of the window, select a Push Entry fromthe drop down box. This box lists all the entries you havepreviously set up using the “Contact Editor” utility inConfiguration Manager. (If you have not set up any entries,exit from this window and set up an entry first.)The next two boxes will fill with the values stored in thecontact entry (e.g., network address and port), and thescheduling box will be empty. For a temporary route, entera specific date and time. Otherwise, enter “now” (withoutquotes) in the box.Finally, click “Save Changes”.You can verify configured routes by expanding the list onthe left side of the window (click the little plus box next to anAE Title to view routes.)Click “Exit” to exit the Routing Configuration tool.When routes are set up, exams are automatically added tothe push queue (according to the routes) once they arevalidated.To edit a route:Onyx-RAD is a registered trademark of Viztek, Inc. © 1995-2002 Page 193