Welcome to Onyx-RAD - Viztek

Onyx-RAD Professional WorkstationUser ManualAnnotation : Measurethe Measure tool buttonThis tool is used to measure straight-line distance (inmillimeters) of an area in the image.To use this tool, click the Measure tool button on theAnnotations toolbar (or choose the tool from the Annotationscontext menu) and:1. (left-)Click on the image to set the first end point ofthe ruler.2. Move the mouse and observe that the line beingdraw follows your movement. Move the mouse towhere the end point of the measurement will be.3. (left-)Click to set the end point. Observe themeasurement that appears.4. At this point, you have the option of moving thedrawn line and measurement out of the way. Movethe mouse up or down (for horizontalmeasurements) or side to side (verticalmeasurements) and note that the text will move withyou.5. (left-)Click a final time to set the placement of thetext.Note that the ability to move the position of themeasurement text allows you to leave the measured areauncovered and in full view.The easiest way to quickly remove the annotation is to rightclickthe image (which displays the image context menu)and choosing “Delete All Annotations” from this menu.Page 68