DTXPRESS IV Owner's Manual - MIDI Manuals

7 Create Your Own Original Drum Kit26-3. If you want to change the Drum Kit name, press the[] buttons to move the flashing cursor to thecharacter you want to edit, then rotate the jog dial toselect a character. A Drum Kit name can contain amaximum of 12 characters, and these can be selectedfrom the following list.space!"#$%&'()*+,-./0123456789:;?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}≥≤26-4. Press the [SAVE/ENTER] button again. A promptappears asking you to confirm the Store operation.KIT~save~to~51~Are~you~sure~?26-5. Press the [SAVE/ENTER] button once more to actuallyexecute the Store operation.*To cancel the Store operation, press any button exceptfor the [SAVE/ENTER] and [SHIFT] buttons. (When“Are you sure?” appears in the display, the jog dial willalso cancel the operation.)When the Store operation is complete, the followingdisplay appears.~~~Completed!With this operation, you have now created aDrum Kit that has an original bass DrumVoice.Use the same procedure to create DrumVoices for the other pads (input sources) andcreate a complete custom Drum Kit of yourown.Factory SetThis operation returns all of the DTXPRESS IV’s internalsettings back to their original factory defaults.Please proceed with caution, since executingthis operation will also rewrite the entire memorycontents of the DTXPRESS IV (all Click Sets,User Trigger Setups 8–11, User Drum Kits 51–70,User Songs 64–83, Utility data) with the data thatwas set in the unit’s memory when it wasshipped from the factory.Operation1. First, press the [SHIFT] + [SAVE/ENTER] buttons tocall up the Utility pages.UTIL1~Hi-hatHHofs=~~0~T=~~5‚2. Press the [>] button several times to call up theUTIL8 page.UTIL8”~Factory~Set3. From the page shown above, press the [SAVE/ENTER] button to call up the prompt shown below,asking for confirmation of the Factory Set operation.*To cancel the Factory Set operation, press any buttonexcept for the [SAVE/ENTER] and [SHIFT] buttons (thejog dial can also be used to cancel the operation).All~data~will~belost.AreYouSure?4. Once again, press the [SAVE/ENTER] button to proceedwith the operation.~All~Memory~Initializing...DTXPRESS IV Owner’s Manual35