Assembly Instructions - Swing-N-Slide

More documents

Recommendations

Info

Assembly InstructionsFig. 14Align the edges of the 4" x 4" legswith the edges of EZ Frame Bracket(8) 2-1/2’’ ScrewsA-Frame Assembly1. Layout 4'' x 4’’s and 2'' x 4'' as shown in(Fig. 14a).2. Make certain to align 4'' x 4''s with theTimberGlove seams on the inside of the A-Frame (facing towards each other).3. Align EZ Frame Bracket with face of4'' x 4''s as shown in (Fig. 14).4. Secure EZ Frame Bracket with (8)2-1/2'' screws to 4'' x 4''s making surethey are flush with each other as shown in(Fig. 14).5. Secure 2'' x 4'' to 4'' x 4''s as shown in(Fig. 14a).6. Flip over and add 2nd bracket. Repeatsteps 2 through 4.Fig. 14aEZ Frame Bracket4" x 4" x 96''(4)2-1/2'' screws4" x 4" x 96''(4)2-1/2'' screws1-1/4'' screws(1 every 12'')12''[PF 3404] 2" x 4" x 47-1/2"47-3/4"SEAM ONINSIDE OFA-FRAME94-1/2"12''NOTE:PLAcE TIMBER GLOVE SOSEAMS ARE FAcINGINWARD TOWARDS EAcHOTHER2-1/2'' screw1-1/4'' screw24
Assembly InstructionsFig. 15TimberGlove SeamWasher2-1/2'' screwsCantilever beamLoc-Nut2-1/2'' screwA-Frame Assembly cont.1. Align EZ-Frame Bracket with carriage bolts on Swing Beam in the location shown in (Fig. 15).2. Attach A-Frame beam to Swing Beam using (1) washers and (1) Loc-Nuts and (2) screws as shown in (Fig. 15).3. Repeat on other bracket. Tighten both Loc-Nuts.25
Page 1 and 2: PB 9240ASSEMBLY INSTRUcTIONSMinimum
Page 3 and 4: This product is intended for single
Page 5 and 6: R(2) 4'' x 4'' Shelf-Loc(1) LH Spli
Page 7 and 8: (2) [PF 3911] 1’’ x 1’’ x 1
Page 9 and 10: Assembly InstructionsIntroducing pa
Page 11 and 12: TIMBERGLOVE APPLIcATIONAssembly Ins
Page 13 and 14: Assembly Instructions•WARNING•A
Page 15 and 16: Assembly InstructionsFig. 5(4)2'' l
Page 17 and 18: Assembly InstructionsFig. 7(2)2-1/2
Page 19 and 20: Fig. 9Assembly Instructions[PF 3903
Page 21 and 22: Assembly InstructionsFig. 11Fig. 11
Page 23: Assembly InstructionsFig. 13Fig. 13
Page 27 and 28: Assembly InstructionsFig. 17(3) [PF
Page 29 and 30: Assembly InstructionsFig. 19x2TIMBE
Page 31 and 32: [PF 3883] 1'' x 4'' x 40-1/4''Assem
Page 33 and 34: NOTE: There must be a 1''Nominal Ga
Page 35 and 36: Fig. 25Assembly InstructionsFig. 25
Page 37 and 38: Fig. 27x2(2)[PF 3908] 2'' x 4'' x 1
Page 39 and 40: Fig. 29Assembly Instructions1/4'' w
Page 41 and 42: Fig. 31Fig. 31a10-1/2''Assembly Ins
Page 43 and 44: 23-3/4''Fig. 33x2Assembly Instructi
Page 45 and 46: Fig. 35Assembly Instructions(6) [PF
Page 47 and 48: RAssembly InstructionsFig. 37[PF 38
Page 49 and 50: Fig. 39Assembly Instructions(4)1-1/
Page 51 and 52: Anchor-ItAssembly InstructionsFig.

Assembly Instructions - Swing-N-Slide

Create successful ePaper yourself

Delete template?

Save as template?