Assembly Instructions - Swing-N-Slide
Assembly Instructions - Swing-N-Slide
Assembly Instructions - Swing-N-Slide
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Fig. 25<strong>Assembly</strong> <strong>Instructions</strong>Fig. 25a(12) [PF 3878] 1'' x 4'' x 24''8-3/4''8-3/4''NOTE: There must be a 1''Nominal Gap betweenbarrier boards.(2)1-1/4''screwsper joint6-5/8''(2) [PF 3895] 5/4'' x 4'' x 12''NOTE: There must be a 2-1/8''Nominal Gap betweenbarrier boards.(3)1-1/2''screwsper board6-5/8''NOTE: 5/4'' x 4'' boards must besecured fom outside the barriers.Picnic Area Barrier and Bench Supports1. Install Picnic Area Barriers as shown in (Fig. 25).2. Install Picnic Bench Supports as shown in (Fig. 25a).1-1/2'' screw1-1/4'' screw35
Change language