Assembly Instructions - Swing-N-Slide

Fig. 39Assembly Instructions(4)1-1/2'' screws[PF 3628] 1'' x 4'' x 20''UNDER SIDE VIEW(4)1'' TrussscrewsFig. 39aFig. 39bSurfacingMaterial2'' BelowGradeSLIDESTAKE2'' AboveGrade1'' Truss screw1-1/4'' screw1-1/2'' screw(2)1-1/4'' screws2'' x 4'' x 17-1/4''PF 3419Slide Install.1. Install Slide Support Board under Front Opening as shown in (Fig. 39).2. Install Slide centered in the provided opening as shown in (Fig. 39a).3. Prepare a level area of ground where the bottom of the slide rests 2" below grade (Fig. 39b).4. Mark where the slide’s bottom meets the ground and drive a 2" x 4" x 17-1/4" stake until its top is 2'' above thegrade prepared in Step 3. For reference, see (Fig. 39b).5. Attach Slide to Stake using (2) 1-1/4'' screws as shown in (Fig. 39a).49