Jabra 9470 user manual - Headset Plus.com

8.3Standard OperationDuring normal operation, the touchscreen shows status information about your headset, displays the currenttarget phone and indicates its status. From here you can answer an incoming call, end the current call, accessyour base settings, choose a target phone and open an audio link to the current target phone.1. Settings icon: touch here to go to the settings menu for your base1and headset.2432. Battery indicator: indicates the current charge level of your headset.3. Current target phone: shows the current target phone andindicates its status (ringing, online, etc.). This is the phone to whichyou will connect if you tap the headset multifunction button ortouch the activate-audio-link icon.4. Other phones: touch the appropriate icon here to change thecurrent target phone — or press the headset multifunction buttonwhen no call is active to cycle through available phones.english55. Activate audio link: touch here to answer an incoming call oractivate the audio link to the current target phone — or tap theheadset multifunction button when no call is active.Figure 33: Touchscreen controls for standard operation8.4Pairing and Connecting the Base and HeadsetTo enable secure wireless communication between the Jabra PRO headset and its base, you must pair the twounits. Once paired, they will find, connect and communicate with each other as needed whenever they are inrange and turned on, but they will ignore all other DECT devices in the area.Pairing the DECT Base and HeadsetThe headset can only be paired with one base at a time, while the base is able to pair with one primaryheadset and an optional and temporary secondary headset. The secondary pairing enables you to share yourconversation with another headset user to support conference calling (see Section 8.12: Conference Calling). Youcannot pair the Jabra PRO base or headset with other types of DECT products.To pair your base and headset:1. Dock the headset to the charging cradle of the target base.2. If the headset is not already paired with that base, then the touchscreen will ask you if you would like to doone of the following:- Pair as primary: touch this icon to make the current headset the new primary device for the current base.This will remove any previous primary headset.- Pair as secondary: touch this icon to make a temporary connection to the current headset. This connectionwill only last until the end of the next (or current) call. The current primary headset will be kept and all audiowill be shared with both headsets.- Do not pair: touch this icon to charge the current headset without pairing with it.3. Touch the icon of your choice and you are done.Note: A similar pairing mechanism is also used by Bluetooth devices. Jabra PRO 9470 supports Bluetoothfor the purpose of adding a mobile phone to your headset solution. However, the Bluetooth pairing iscompletely independent of the DECT pairing mechanism described above. See Section 9.2: Pairing andConnecting with Other Bluetooth Devices for details.Jabra PRO 9460, 9460-Duo and 9470 User manualwww.HeadSetPlus.com43