ACCU-DART User Manual

MISys PO ReceiptDescription:Instructions:This function allows the user to receive MISys POs from suppliers.*You must have MISys running on your desktopMenu Option #43Enter/Scan the PO #Confirm that this is the correct vendor/Purchase OrderEnter/Scan the item to be receivedEnter the quantity receivedEnter/Scan the “To Bin” (opt); repeatWhen you have scanned all the items to be received, press “enter”Select from the options:(S)ave – store the transaction in a new or unposted batch for the RF User(P)ost – record the transactionMISys Physical Inventory CountDescription:Instructions:This function allows the user to count MISys inventory and post reconciliation.*You must have MISys running on your desktopMenu Option #44Select from the Options:(S)tock – Stock only items(W)IP – WIP only itemsAsk for Quantity “Yes” – ACCU-DART will ask for quantity“No” – Scan each item individuallyEnter/Scan the itemEnter the quantity countedEnter/Scan the “To Bin” (opt); repeatWhen you have scanned all the items to be counted, press “enter” to Save the scannedtransactions to the MISys PI Count Batch.MISys Finished Goods / WIP Assembly from BOMDescription:Instructions:This function allows the user to assemble MISys finished goods and/or WIP from Bills of Material.*You must have MISys running on your desktopMenu Option #45Ask for Quantity “Yes” – ACCU-DART will ask for quantity“No” – Scan each item individuallyEnter/Scan the Finished Goods item being assembled*By Default, ACCU-DART uses the current revision of the BOMEnter/Scan the “To Bin” (opt)Enter the Build quantity for the finished good item that has been assembled; repeatWhen you have scanned all the items, press “enter”Select from the options:(S)ave – store the transaction in a new or unposted batch for the RF User(P)ost – record the transaction25