ICE MACHINES Q-Model Service Manual

Installation Instructions Section 2WATER SUPPLY AND DRAIN LINE SIZING/CONNECTIONS! CautionPlumbing must conform to state and local codes.Location Water Temperature Water Pressure Ice Machine FittingIce MakingWater InletIce MakingWater DrainCondenserWater InletCondenserWater Drain33°F (0.6°C) Min.90°F (32.2°C) Max.20 psi (137.9 kPA) Min.80 psi (551.5 kPA) Max.--- ---33°F (0.6°C) Min.90°F (32.2°C) Max.20 psi (137.9 kPA) Min.150 psi (1034.2 kPA) Max.--- ---Bin Drain --- ---3/8" FemalePipe Thread1/2" FemalePipe ThreadTubing Size Up to IceMachine Fitting3/8" (9.5 mm) minimuminside diameter1/2" (12.7 mm) minimuminside diameterQ1300/Q1600/Q1800 - 1/2" Female Pipe ThreadAll Others - 3/8" Female Pipe Thread1/2" FemalePipe Thread3/4" FemalePipe Thread1/2" (12.7 mm) minimuminside diameter3/4" (19.1 mm) minimuminside diameterSV1626Figure 2-3. Typical Water Supply Drain Installation2-12 Part No. 80-1100-3