ICE MACHINES Q-Model Service Manual

Section 3MaintenanceWater Distribution Tube1. Disconnect the water hose from the distributiontube.Water Curtain1. Gently flex the curtain in the center and remove itfrom the right side.1. LIFT UP2. SLIDE BACK3. SLIDE TO RIGHT321DISTRIBUTIONTUBETHUMBSCREWSTEP 1LOCATINGPINTHUMBSCREWSV1620STEP 2SV1213Figure 3-14. Water Distribution Tube Removal1. Loosen the two thumbscrews which secure thedistribution tube.2. Lift the right side of the distribution tube up off thelocating pin, then slide it back and to the right.Figure 3-16. Water Curtain Removal2. Slide the left pin out.! CautionDo not force this removal. Be sure the locating pin isclear of the hole before sliding the distribution tubeout.3. Disassemble for cleaning.A. Twist both of the inner tube ends until the tabsline up with the keyways.B. Pull the inner tube ends outward.INNER TUBEINNER TUBETABKEYWAYSV1211Figure 3-15. Water Distribution Tube DisassemblyPart No. 80-1100-3 3-13