ICE MACHINES Q-Model Service Manual

Section 3MaintenanceSANITIZING PROCEDUREUse sanitizer to remove algae or slime. Do not use it toremove lime scale or other mineral deposits.Step 1 Set the toggle switch to the OFF position afterice falls from the evaporator at the end of a Harvestcycle. Or, set the switch to the OFF position and allowthe ice to melt off the evaporator.! CautionNever use anything to force ice from the evaporator.Damage may result.Step 4 Use the sanitizing solution and a sponge orcloth to sanitize (wipe) all parts and interior surfaces ofthe ice machine. Sanitize the following areas:A. Side wallsB. Base (area above water trough)C. Evaporator plastic partsD. Bin or dispenserStep 5 Rinse all sanitized areas with clear water.Step 6 Install the removed parts, restore power andplace toggle switch in the ice position.! WarningDisconnect electric power to the ice machine (anddispenser if applicable) at the electric switch boxbefore proceeding.Step 2 Refer to Removal of Parts For Cleaning/Sanitizing and remove ice machine parts.Step 3 Mix a solution of water and sanitizer.Solution Type Water Mixed WithSanitizer 4 gal. (15 l) 3 oz (90 ml) sanitizerPart No. 80-1100-3 3-7