Vig645M Motherboard Manual - Viglen Download

3. Remove the processor from its protective cover. Hold the processor only at theedges, being careful not to touch the bottom of the processor (see Figure 23).Figure 18: Remove the processor from the protective coverNote: Do not discard the processor cover. Always replace the processor cover if youremove the processor from the socket.4. Hold the processor with your thumb and index finger oriented as shown in Figure 23to align your fingers with the socket finger cut-outs. Make sure that the processor Pin1 indicator (gold triangle) is aligned with the Pin 1 chamfer on the socket (Figure 23,B) and that the notches on the processor align with the posts on the socket (Figure23, C). Lower the processor straight down without tilting or sliding it in the socket(Figure 23, A).Figure 19: Install the processorV1.0 Vig645M Motherboard Manual 26