Sound & Parameter List - Roland

Rhythm editing parametersParameter Value DescriptionResonance 0–127 Amount by which the sound in the region of the cutoff frequency will be emphasizedIncreasing this value will produce a more strongly distinctive character. Raising this excessively willcause oscillation and distortion.LPF BPF HPF PKGLevelHighparameter valueFrequencyCutoff frequencyReso Velo Sens(Resonance VelocitySensitivity)Low-63– +63 Amount by which velocity will affect the resonanceFilter Env (Filter Envelope)These parameters specify the depth of the filter envelope (time-variant change in cutoff frequency), and specify the shape of the envelope itself.T1 T2 T3 T4L1L0L2L3CutoffFrequencykey ispressedkey isreleasedL4TimeParameter Value DescriptionF-Env Depth(Filter envelopedepth)-63– +63 Depth of the filter envelopeIncreasing this value will produce a greater effect. Negative (-) values will invert the envelope.F-Env V-Curve(Filter envelopevelocity curve)FIX, 1–7Curve by which velocity will affect the cutoff frequencyIf this is “FIX,” the cutoff frequency will stay the same regardless of how the velocity varies.F-Env V-Sens(Filter envelopevelocity sensitivity)F-Env T1 V-Sens(Filter EnvelopeTime 1 VelocitySensitivity)F-Env T4 V-Sens(Filter EnvelopeTime 4 VelocitySensitivity)F-Env Time1–4(Filter EnvelopeTime 1–4)F-Env Level0–4(Filter EnvelopeLevel 0–4)1 2 3 4 5 6 7-63– +63 Amount by which velocity will affect the depth of the filter envelope-63– +63 Amount by which velocity will affect T1 (time) of the filter envelopeSpecify a positive (+) value if you want to speed up the T1 time, or a negative (-) value to slow it down.-63– +63 Amount by which the key-off velocity will affect T4 (time) of the filter envelopeIncreasing this value will cause a correspondingly greater difference between slowly released andquickly released notes. Specify a positive (+) value if you want to speed up the T4 time, or a negative(-) value to slow it down.0–127 Filter envelope times (T1–T4)Higher settings of these values will lengthen the time over which the next cutoff frequency level ofthe envelope is reached. (For example, T2 is the time over which the level changes from L1 to L2.)0–127 Filter envelope levels (L0–L4)Specifies the change in cutoff frequency at each point, relative to the reference level.59