Pro 200 Series Furnace - Whip Mix

Pro 200 Series Furnace Operations ManualMenu Selection ButtonsThe three menu selection items (Run Program, ChangeProgram and Special Functions) will display differentoptions. The menu options can be seen by turning theSelector Knob.Run Program — Press the Run Program Selection to:• Select a program to run.Change Program — the following actions may be initiatedby first pressing the Change Program item from the MainMenu, then turning the Selector Knob to display thefollowing options:• Look at a program• Add/Edit a program• Copy/change a program• Move a program• Erase a programSpecial Functions — press the Selector Knob and turnthe Selector Knob to one of the following actions:• Start Night mode• Change Idle temperatures• Set vacuum level• Select degree C (Centigrade, centimeters),or F (Fahrenheit, inches)• Set program start delay• Set Night mode temperature• Select between constant vacuum pump orintermittent cycle vacuum pump• Change volume level of sounds• Select upper or lower case letters on the display• Select Displayed Language(English, French, German, Italian, Spanish)• Cal Low Fusing• Cal High Fusing• Cal Press (On Pro Press Only)• Copy firing programs from Furnace to Memory Card(Export Programs)• Copy firing programs from Memory Card to Furnace(Import Programs)• Export Settings• Import Settings• Test Furnace• Calibrate Oven817280 Pro Series 200 Manual_ENG.indd 8 8/12/11 1:54 PM