IC-M402 - ICOM Canada

More documents

Recommendations

Info

INSTALLATION AND MAINTENANCE9■ Mounting the transceiverïUsing the supplied mounting bracketThe universal mounting bracket supplied with your transceiverallows overhead or dashboard mounting.EXAMPLE•Mount the transceiver securely with the 2 supplied screws(M5 x 20) to a surface which is more than 10 mm thick andcan support more than 5 kg.•Mount the transceiver so that the face of the transceiver is at90° to your line of sight when operating it.CAUTION: KEEP the transceiver and microphone atleast 1 meter away from your vessel’s magnetic navigationcompass.NOTE: Check the installation angle; the function displaymay not be easy-to-read at some angles.24
9 INSTALLATION AND MAINTENANCE■ MB-69 mounting bracket(option)An optional MB-69 FLUSH MOUNT is available for mounting thetransceiver to a flat surface such as an instrument panel.e Attach the clamps on either side of the transceiver with 2supplied bolts (5 × 8 mm).• Make sure that the clamps align parallel to the transceiver body.CAUTION: KEEP the transceiver and microphone atleast 1 meter away from your vessel’s magnetic navigationcompass.q Using the template on the last page, carefully cut a holeinto the instrument panel (or wherever you plan to mountthe transceiver).w Slide the transceiver through the hole as shown below.<strong>IC</strong>-<strong>M402</strong>r Tighten the end bolts on the clamps (rotate clockwise) sothat the clamps press firmly against the inside of the instrumentcontrol panel.t Tighten the locking nuts (rotate counterclockwise) so thatthe transceiver is securely mounted in position as below.y Connect the antenna and control cable, then return the instrumentcontrol panel to its original place.25
Page 1: INSTRUCTION MANUALVHF MARINE TRANSC
Page 4 and 5: CAUTIONSRWARNING! NEVER connect the
Page 6: TABLE OF CONTENTSFOREWORD .........
Page 9 and 10: 2PANEL DESCRIPTION■ Function disp
Page 11 and 12: 3 BASIC OPERATION■ Channel select
Page 13 and 14: 3 BASIC OPERATION■ Call channel p
Page 15 and 16: 5 SCAN OPERATIONS■ Setting tag ch
Page 17 and 18: 6 DSC OPERATION■ MMSI code progra
Page 19 and 20: 6 DSC OPERATION■ Transmitting DSC
Page 21 and 22: 6 DSC OPERATIONïTransmitting posit
Page 23 and 24: 6 DSC OPERATION17■ Receiving DSC
Page 25 and 26: 7 INTERCOM OPERATION (IC-M402 only)
Page 27 and 28: 8 SET MODEïDual/tri watchThis item
Page 29: 9 INSTALLATION AND MAINTENANCE■ C
Page 33 and 34: 10 HM-127 REMOTE-CONTROL MICROPHONE
Page 45 and 46: 12 CHANNEL LIST39Channel number Fre
Page 47 and 48: 13 SPECIFICATIONS■ Dimensions41
Page 49 and 50: OPTION15■Options• MB-69 FLUSH M

IC-M402 - ICOM Canada

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?