PIC Design - RBC Bearings

MOUNTING COMPONENTSAdjustable Joint and Steel Corner Braces — Standard & [Miniature]Adjustable Joint ConnectorSuggested hardware SCH8-06 screw with T-Nuts (2).Material: AluminumFinish: Clear AnodizeSCB2.343 DIA.HOLES (2)2.131.50Reinforced Corner BraceSuggested hardware SCH9-06 screw and SCH1 nut (4).[SCH9M-04 screw and SCH2M-10 nut (4)]Material: Alloy SteelFinish: Black Powder Coat.25 [.13].343 DIA.HOLES (4)[.281 Dia.]6.0 [4.0].75[.5]1.50[1.0]Corner BraceSuggested hardware SCH9-06 screw and SCH1 nut (4).[SCH9M-04 screw and SCH2M-10 nut (4)]Material: Alloy SteelFinish: Black Powder Coat.25 [.13]SCB3-15[SCB3M-10] .343 DIA.HOLES (4)[.281 Dia.].75[.5]1.50[1.0]6.0 [4.0]1.50[1.0] .75[.5]3.0 [2.0]1.50[1.0]SCB3GL-15[SCB3GLM-10]SCB3GR-15[SCB3GRM-10]1.50[1.0].75[.5]3.0[2.0]1.50[1.0]Corner Brace ReinforcedSuggested hardware SCH9-06 screw and SCH1 nut (8).[SCH9M-04 screw and SCH2M-10 nut (8)]Material: Alloy SteelFinish: Black Powder CoatSCB4G-30[SCB4GM-20].25 [.13]Corner BraceSuggested hardware SCH9-06 and SCH1 nut (8).[SCH9M-06 screw and SCH2M-10 nut (8)]Material: Alloy SteelFinish: Black Powder Coat.25 [.13]SCB5-30[SCB5M-20]Corner BlockMaterial: AluminumFinish: Clear AnodizeSCB6[SCB6M]1.50[1.0]1.50[1.0]1.50[1.0].343 DIA.HOLES (8)[.281 Dia.].75[.5]1.50[1.0]6.0 [4.0].343 DIA.HOLES (4)[.281 Dia.].75[.5]1.50[1.0]6.0 [4.0]3.0[2.0]1.50[1.0].75[.5]3.0[2.0]1.50[1.0]3.0[2.0]1.50[1.0].75[.5]3.0[2.0]1.50[1.0]Use withSX1515 or SX1515L[use with SX1010M]Plastic hole plugsincluded. RequiresSCH9-10 [SCH9M-06]FASTENING HARDWARE — STANDARD & [MINIATURE]Pivot T-NutsLoads into extrusion from the side.Not to be used on SX1010L and SX1015L.SCH1-P[SCH1M-P]5/16-18 UNCTHRU [1/4-20].5 [.37]1.0Connector T-NutsLoads into extrusion from end only.SCH15/16-18 UNCTHRU5/85/8Economy T-NutsSCH2-15 Long T-Nut[SCH2M-15]5/16-18 UNCTHRU [1/4-20] 1.50.629 [.4375]SCH2-10 T-Nut[SCH2M-10]5/16-18 UNCTHRU [1/4-20]1.00Material: Alloy SteelFinish: Zinc Platewww.pic-design.comInteractive catalog ■ CAD ■ e-commerceDESIGN®Phone: 800-243-6125 ■ FAX: 203-758-8271E-Mail: sales@pic-design.com9-7