PIC Design - RBC Bearings

PIC CERAMIC COATED LINEAR BEARINGSLinear Rotary Motion BearingsClosed Series1. Self aligning mounting up to 2 o available, consult factory.2. Larger size bearings available, consult factory.DESIGN ADVANTAGES● Economical alternative to linear● Vacuum Application up to 10 -10 Torrball bearings — interchangeable ● High load capacitywith PL & PO series.● Outstanding wear, prolonged bearing● Eliminates shaft brinellingand shaft life● Designed for linear and rotary● Corrosion resistingmotion● Electrically insulating● Quiet operation● One piece construction — no balls● Lightweightto damage or jam mechanisms● Special shapes and sizes available,PERFORMANCE DATAconsult factoryMaximum PV (continuous) 40,000Maximum linear velocity: 2000 SFMMaximum Load: 5000 PSICoefficient of Friction: .04 (with recommended shaft and lithium stearate grease)Material: Special aluminum alloy with a proprietary low friction coating (RC 85)Recommended shaft: 58-63 Rockwell “C”, 8-16 RMSElectrical Resistance (flat surface): 1200 VDCInsulation Resistance: above 250 MegohmsLubrication: Essential to achieve maximum performance. Lithium Stearategrease is recommended. (Silicone fluid lubricants have a negative effecton performance.)Open SeriesPIC METRIC CERAMIC COATED LINEAR BEARINGSThese bearings are produced to ISO standards and are exactlyinterchangeable dimensionally with metric ball bushings currentlyproduced in Europe. Retention is achieved through the use of aset screw of suitable point dimension to be accepted into theretention hole illustrated. Retention hole diameters are listed incolumn R, Metric PIC Linear Bearings are available with orwithout integral seals. Since the seals are recessed, all bearingsare the same length. There’s no need to allow extra space forsealed bearings.*Note: MBLC - X = Closed; MBLA - X = Adjustable; MBLO - X = Open4-12Phone: 800-243-6125 ■ FAX: 203-758-8271E-Mail: sales@pic-design.comDESIGN®www.pic-design.comInteractive catalog ■ CAD ■ e-commerce