PIC Design - RBC Bearings

RDESIGNRECISIONNDUSTRIALOMPONENTSRGEARSWhether the application is to transfer motion ortransmit power, PIC Design has the complete range ofgearing needed to fulfill any application requirement.Standard gears and assemblies are available foroperation on parallel and right-angle shafts, linearmotion applications can also be satisfied.PIC Design Gears — A Brief Overview1. Spur GearsDesigned and manufactured to mount onparallel shafts. Available in (inch) DiametralPitch and (metric) Modules.2. Miter & Bevel GearsDesigned and manufactured to operate onintersecting shafts positioned at a right angle.3. Spiral GearsDesigned to operate at right angles with thepinion able to be mounted to mesh withany part of the 360 o of the gear.4. Cluster GearsSpur gears manufactured to be mountedon a shaft and another gear to be mountedon the cluster for use in multiple gearratios in a gear box.5. Helical GearsDesigned with a 45 o Helix angle to operateon parallel or right angle shafts.6. Anti-Backlash GearsTwo independent gears mounted to samehub with a spring between the two providinga constant full-tooth engagement with themating spur gear, thereby eliminatingbacklash in the mesh. Available in Spur,Worm and Miter Gears.7. Worm & Worm WheelsHigh ratios attainable in a single reductionwith shafts at right angles to each other inlimited space.8. Pinion ShaftsDesigned to be either supported bybearings or pressed into hollow shaft tooperate with spur gear mounted on parallelshaft.9. RacksA gear with the teeth in a straight line,which produces linear motion whenmeshed with a circular spur gear.10. For special gears including internal, sector,etc. Please consult factorywww.pic-design.comInteractive catalog ■ CAD ■ e-commerceDESIGN®Phone: 800-243-6125 ■ FAX: 203-758-8271E-Mail: sales@pic-design.com12-1