PIC Design - RBC Bearings

NO-SLIP POSITIVE DRIVE BELT “CHAIN”.25 ( 1 /4") Pitch.2500 .1300Pitch.2500Typ.A.032" DiameterStainless Steel Core (2).205.170.340AA-A.085" Diameter (2)Material:F25CS Series: Molded Polyurethane, .032 diameter Stainless Steel Cores.Color: Light BrownF25CA Series: Molded Polyurethane, .032 diameter Aramid (Kevlar) Cores.Color: Light BrownNote: Factory spliced belts are overmoldedNumber OfDrive PinsLength(Ref.)Part Number*40 10.000 F25CS-4050 12.500 F25CS-5060 15.000 F25CS-6070 17.500 F25CS-7080 20.000 F25CS-8090 22.500 F25CS-90100 25.000 F25CS-100110 27.500 F25CS-110120 30.000 F25CS-120130 32.500 F25CS-130140 35.000 F25CS-140150 37.500 F25CS-150160 40.000 F25CS-160170 42.500 F25CS-170180 45.000 F25CS-180190 47.500 F25CS-190200 50.000 F25CS-200210 52.500 F25CS-210Number OfDrive PinsLength(Ref.)Part Number*220 55.000 F25CS-220230 57.500 F25CS-230240 60.000 F25CS-240250 62.500 F25CS-250260 65.000 F25CS-260270 67.500 F25CS-270280 70.000 F25CS-280290 72.500 F25CS-290300 75.000 F25CS-300310 77.500 F25CS-310320 80.000 F25CS-320330 82.500 F25CS-330340 85.000 F25CS-340350 87.500 F25CS-350370 92.500 F25CS-370380 95.000 F25CS-380390 97.500 F25CS-390* For Aramid Cores, substitute A for S in the part numberFor other length belts longer than the minimum listed, substitute the desirednumber of drive pins at the end of the part number.Bulk Footage — Not SplicedLengthPart Number5 Ft F25CS-5FT10 Ft F25CS-10FT25 Ft F25CS-25FT50 Ft F25CS-50FT100 Ft F25CS-100FTSpecial length belts and other bulklengths available. Consult factory.For field splicing use Kit F25C-SK.See page 5-5.* For Aramid Cores, substitute A for S in the part number.25 Pitch Twin Core No-Slip Belts — Series F25CSDesigned to provide an economical alternative to 25-pitch rollerchain, with smoother motion. Drive pins are 44% larger in diameterthan FRA & FRS series.5-18Phone: 800-243-6125 ■ FAX: 203-758-8271E-Mail: sales@pic-design.comDESIGN®www.pic-design.comInteractive catalog ■ CAD ■ e-commerce