DH-10 Heads & Controls OPERATOR'S MANUAL ... - Lincoln Electric

C-3K1500-2 for Magnum 200/300/400 gun with K466-10 connectionkit. (Also Tweco 4).K1500-3 for Magnum 550 gun with K613-7 connection.(Also Tweco 5).ACCESSORIESC-3are rated for 200 amps 60% duty cycle. (Consult salesspecifications for appropriate models)K534 Magnum 250L FM GMAW gun and cable assembliesare rated for 250 amps, 30% duty cycle. (Consult salesspecifications for appropriate models)K1500-4 (Miller Connection) for any gun having anewer style miller connection. Install gun adaptersper the instructions shipped with the unit.K1500-5 OXO gun receiver bushing.GUN AND CABLE ASSEMBLIESThe following Lincoln gun and cable assemblies are compatiblewith DH Wire Feed heads with appropriate K1500Gun Adapter:K126 (Requires K1500-1) Innershield gun and cableassemblies are rated at 350 amps, 60% duty cycle.(Consult sales specifications for appropriate models)K115 (Requires K1500-1) Innershield gun and cableassemblies are rated at 450 amps, 60% duty cycle.(Consult sales specifications for appropriate models)K470 (With K466-9 requires K1500-2) Magnum 300GMAW gun and cable assemblies are rated 300 amps,60% duty cycle. (Consult sales specifications for appropriatemodels)K471 (With K466-9 requires K1500-2) Magnum 400GMAW gun and cable assemblies are rated 400 amps,60% duty cycle. (Consult sales specifications for appropriatemodels)K478 Magnum 300 FM GMAW gun and cable assembliesare rated for 300 amps, 60% duty cycle. (Consult salesspecifications for appropriate models)K479 Magnum 400 FM GMAW gun and cable assembliesare rated for 400 amps, 60% duty cycle. (Consult salesspecifications for appropriate models)K1558-1 Remote Switch Interface Module, the RemoteSwitch Interface Module can be used with the DH-10 DoubleHeader wire feeder models, using G3041-2 (or higher)Control Boards.The module provides for user interface connection of anexternal switch (flow switch, ect.) which must be closed toenable the feeder welding operation. Also, the Module providesfor interface connection of external equipment (fumeextractor, ect.) to the Module’s isolated relay contacts whichactuate when the feeder welding gas solenoid is activated(representing welding operation in progress).When used with the DH-10 Double Head feeder, this oneModule provides these input and output switch function connectionsindependently for each head operation.This module is necessary when using the K1536-1 waterflow sense kit with the DH-10.K497 (With K466-9 requires K1500-2) Magnum 200GMAW gun and cable assemblies are rated 200 amps,60% duty cycle. (Consult sales specifications for appropriatemodels)K541 (With K466-9 requires K1500-2) Magnum 400 ShortNeck GMAW gun and cable assemblies are rated 400amps, 60% duty cycle. (Consult sales specifications forappropriate models)K598 (With K613-7 requires K1500-3) Magnum 550GMAW gun and cable assemblies are rated 550 amps,60% duty cycle. (Consult sales specifications for appropriatemodels)The following Lincoln gun and cable assemblies areequipped with a Fast-Mate connector. They can be usedwith DH wire feed models by installing a K489-7 Adapter, ora K489-2 Fast-Mate adapter kit and a K1500-1 LincolnGun adapter.K684 Magnum "Super Cool" FM water cooled GMAW gunand cable assemblies are rated 450 amps, 100% dutycycle (CO2). (Consult sales specifications for appropriatemodels)K498 Magnum 200 FM GMAW gun and cable assembliesDH-10