EAGLE CORR PE™ * - JM Eagle

Figure 21.2 UnloadingJM Eagle's Eagle Corr PE is lightweight and may be unloaded by j Hand(for 18-inch diameter and smaller). k Conventional forklifts for compactshipping units, palletized bundles in a wood frame which may be used toship large orders of pipe. Exercise care to avoid impact or contact betweenthe forks and the pipe. The means by which Eagle Corr PE pipe are unloadedin the field is the decision and responsibility of the customer. Preferredunloading is in units using mechanical equipment such as forklifts,cranes, cherry pickers or front-end loaders with adequate forks and trained,competent operators and equipment rated to safely handle the load. Whenunloading units, the instructions below should be carefully followed. Removeonly one unit at a time.1. Follow OSHA Safety Requirements.2. Remove restraints from the top unit loads. These may be either tiedownstraps, ropes or chains with protection. Extreme caution must be usedwhen removing restraints from the shipment. The load may have shiftedand could fall from the truck.3. If there are boards across the top and down the sides of the load that arenot part of pipe packaging or secure the load from rolling off the truck,remove them.EAGLE CORR PE INSTALLATION GUIDE9