EAGLE CORR PE™ * - JM Eagle

4. Place a wooden block across installation stub.5. Push back of excavator bucket against block until the pipe is full insertedinto the bell and is homed. Caution should be exercised not to over homethe pipe.Figure 13CAUTION: While attempting assembly, be sure the pipe lengths are instraight alignment and not misaligned vertically or horizontally. Improperalignment will cause a difficult or impossible assembly. If pipe must be misalignedin line or grade, it can be done after assembly is completed. Suchmisalignment should not exceed 1.5 degrees at each joint. Also, note thatexcessive misalignment or an over-assembled joint can cause leaks.Figure 14Installation Stub Field Fabrication24 EAGLE CORR PE INSTALLATION GUIDE