EAGLE CORR PE™ * - JM Eagle

The physical (or chemical) properties of Eagle Corr PE Storm Drain pipe presented in this booklet represent typicalaverage values obtained in accordance with acceptedtest methods and are subject to normal manufacturingvariations. They are supplied as a technical service and aresubject to change without notice. Check with JM Eagle Product Assurance to ensure current information.How This Guide Can Help YouThis booklet was written especially for the installer and those who directthe actual handling and installation of Eagle Corr PE storm drain pipe. Thisguide should be used in conjunction with the following applicable industryaccepted installation and testing practices. This document should not beconsidered a full guide or manual in lieu of the following industry practices:1. AASHTO LRFD Bridge Construction Specification Section 30 –05 (or later)2. ASTM F449-02 (or later) “Practice for Subsurface Installation of CorrugatedPolyethylene Pipe for Agricultural Drainage or Water Table Control.”3. ASTM F1417-05 (or later) “Installation Acceptance of Plastic GravitySewer Lines Using Low-Pressure Air.”4. ASTM F1668-96 (2002) (or later) “Construction of Buried Plastic Pipe.”5. ASTM D2321-05 (or later) “Underground Installation of ThermoplasticPipe for Sewers and Other Gravity-Flow Applications.”6. ASTM F2487–“Standard Practice for Infiltration and Exfiltration AcceptanceTesting of Installed Corrugated High Density Polyethylene Pipelines.”This guide is meant as an explanatory supplement to the materials above onhow to install Eagle Corr PE storm drain pipe under normal conditions so asto comply with JM Eagle Installation Guide. Any discrepancies between theabove standards and the written information contained herein should be broughtto the attention of JM Eagle Product Assurance immediately for resolution byJM Eagle prior to any actions by either contractor, engineer, or municipality.This guide is not intended to supply design information nor to assume the responsibilityof the engineer (or other customer representative) in establishingprocedures best suited to individual job conditions so as to attain satisfactoryperformance.4 EAGLE CORR PE INSTALLATION GUIDE