MWA-204 User's Manual v2.0 - MyTek Communication

Recommendations

Info

USER’S MANUAL OF MWA-204 WLAN BROADBAND ROUTER Version: 2.2ItemDescriptionDisable Wireless LAN Click on to disable the wireless LAN data transmission.InterfaceBandClick to select 2.4GHz(B) / 2.4GHz(G) / 2.4GHz(B+G)ModeClick to select the WLAN AP / Client / WDS / AP+WDSwireless mode.Site SurveyThe Site Survey button provides tool to scan the wirelessnetwork. If any Access Point or IBSS is found, you couldchoose to connect it manually when client mode isenabled. Refer to 3.3.9 Site Survey.SSID It is the wireless network name. The SSID can be 32bytes long.Channel Number Select the wireless communication channel frompull-down menu.Associated Clients Click the Show Active Clients button to open ActiveWireless Client Table that shows the MAC address,transmit-packet, receive-packet and transmission-rate foreach associated wireless client.Enable Mac Clone Take Laptop NIC MAC address as wireless client MAC(Single Ethernet Client) address. [Client Mode only]Enable Universal Click to enable Universal Repeater ModeRepeater ModeSSID of Extended Assign SSID when enables Universal Repeater Mode.InterfaceApply Changes Click the Apply Changes button to complete the newconfiguration setting.ResetClick the Reset button to abort change and recover theprevious configuration setting.3.3.5 Wireless - Advanced SettingsThese settings are only for more technically advanced users who have asufficient knowledge about wireless LAN. These settings should not be changedunless you know what effect the changes will have on your WLAN BroadbandRouter.16
USER’S MANUAL OF MWA-204 WLAN BROADBAND ROUTER Version: 2.2Screen snapshot – Wireless Advanced SettingsItemDescriptionAuthentication Type Click to select the authentication type in Open System,Shared Key or Auto selection.Fragment Threshold Set the data packet fragmentation threshold, value can bewritten between 256 and 2346 bytes.Refer to 4.10 What is Fragment Threshold?RTS Threshold Set the RTS Threshold, value can be written between 0and 2347 bytes.Refer to 4.11 What is RTS(Request To Send) Threshold?Beacon Interval Set the Beacon Interval, value can be written between 20and 1024 ms.Refer to 4.12 What is Beacon Interval?Data RateSelect the transmission data rate from pull-down menu.Data rate can be auto-select, 11M, 5.5M, 2M or 1Mbps.17
Page 4 and 5: USER’S MANUAL OF MWA-204 WLAN BRO
Page 23: USER’S MANUAL OF MWA-204 WLAN BRO
Page 74 and 75:
USER’S MANUAL OF MWA-204 WLAN BRO
Page 76 and 77:
Page 78 and 79:
show all

MWA-204 User's Manual v2.0 - MyTek Communication

Create successful ePaper yourself

Delete template?

Save as template?