MWA-204 User's Manual v2.0 - MyTek Communication

Recommendations

Info

USER’S MANUAL OF MWA-204 WLAN BROADBAND ROUTER Version: 2.2selected.Set DNS Manually Click to select getting DNS address for DHCP support.DNS 1 Fill in the IP address of Domain Name Server 1.DNS 2 Fill in the IP address of Domain Name Server 2.DNS 3 Fill in the IP address of Domain Name Server 3.Clone MAC Address Fill in the MAC address that is the MAC address to becloned. Refer to 4.24 What is Clone MAC Address?Enable uPNP Click the checkbox to enable uPNP function.Refer to 4.22 What is Universal Plug and Play (uPNP)?Enable Ping Acces on Click the checkbox to enable WAN ICMP response.WANEnable Web Server Click the checkbox to enable web configuration fromAccess on WAN WAN side.Set TTL value Click to Enable and set Time to Live value.Apply Changes Click the Apply Changes button to complete the newconfiguration setting.ResetClick the Reset button to abort change and recover theprevious configuration setting.32
USER’S MANUAL OF MWA-204 WLAN BROADBAND ROUTER Version: 2.2IIIPPPoEScreen snapshot – WAN Interface Setup – PPPoEItemPPPoEUser NamePasswordService NameDescriptionClick to select PPPoE support on WAN interface. Thereare user name, password, connection type and idle timesettings need to be done.If you select the PPPoE support on WAN interface, fill inthe user name and password to login the PPPoE server.If you select the PPPoE support on WAN interface, fill inthe user name and password to login the PPPoE server.Fill in the service name of Service Name. The default33
Page 4 and 5: USER’S MANUAL OF MWA-204 WLAN BRO
Page 39: USER’S MANUAL OF MWA-204 WLAN BRO

MWA-204 User's Manual v2.0 - MyTek Communication

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?