DeviceNet Modules, Series 90-30, Manual, GFK-2196

Chapter1DeviceNet Modules for the Series 90-30 PLCFinding Information in this BookChapter 1: DeviceNet Modules for the Series 90-30 PLC, provides basic information about theSeries 90-30 DeviceNet Master Module (IC693DNM200) and the Series 90-30 DeviceNet SlaveModule (IC693DNS201).Chapter 2: Installation, discusses power requirements, cable specifications, grounding, moduleinstallation, and LED indications.Chapter 3: PLC Configuration for the DeviceNet Master, explains how to add a DeviceNetMaster Module to the configuration of the Series 90-30 PLC. It also explains how to configurecommunications connections, the module, and the DeviceNet network.Chapter 4: PLC Configuration for the DeviceNet Slave, explains how to add a DeviceNet SlaveModule to the configuration of the Series 90-30 PLC.Chapter 5: Module Operation, describes how the Series 90-30 DeviceNet Master Module and theSeries 90-30 DeviceNet Slave Module function in a Series 90-30 PLC system.Chapter 6: Programmed Communications (COMMREQs), explains how the application programcan communicate with the module for Explicit Messaging and for reading status information.Chapter 7: DeviceNet Objects for Series 90-30 Modules, describes the information objects that aredefined for the Series 90-30 DeviceNet modules.Appendix A: DeviceNet EDS Files, contains the Electronic Datasheet (EDS) Files that are definedfor the Series 90-30 DeviceNet Master Module and the Series 90-30 DeviceNet Slave Module.For Detailed Information about DeviceNetFor detailed information about DeviceNet, contact the Open DeviceNet Vendor Association.Open DeviceNet Vendor Association, Inc.20423 State Road 7Suite 499Boca Raton, FL. 33498phone: (954) 340-5412FAX: (954) 340-5413Internet: HTTP://WWW.ODVA.ORGEmail: