Rider's Manual K 1200 S - K100.biz

z Maintenance1 Extending tool holderAdapters to accommodate alltoolsRemoving and installing sparkplugs2 1/4" bits5x Torx, for example for removingand installing rear wheel2x cross-head bits1x plain screwdriver bit3 3/8" adapter for socketheadscrews, w/f 22Removing and installing frontaxle4 Electric torchLED bulb5 Socket3x open-ended spanner, forexample for connecting anddisconnecting leads to batteryterminals6 AdapterAdapter for 1/4" bits9x12 mm and 3/8" swivel adaptersEngine oilChecking engine oil levelThe engine can seize if theoil level is low, and this canlead to accidents.Always make sure that the oillevel is correct.Oil can collect in the sumpif the motorcycle is out ofuse for an extended period oftime; this oil has to be pumpedinto the oil tank before the levelis read. The engine oil must beat operating temperature to dothis. Checking the oil level withthe engine cold or after no morethan a short ride will lead to misinterpretation;this in turn, meansthat the engine will be operatedwith the incorrect quantity of oil.In order to ensure that the engineoil level is read correctly,check the oil level only after alengthy trip.Make sure the engine is at operatingtemperature and holdthe motorcycle upright.with OA Centre stand:Check that the engine is at operatingtemperature, make surethe ground is level and firmand place the motorcycle on itscentre stand.Allow the engine to idle for oneminute.897