12.07.2015 Views

Rider's Manual K 1200 S - K100.biz

Rider's Manual K 1200 S - K100.biz

Rider's Manual K 1200 S - K100.biz

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

8116z Maintenanceindicators in the display tell youthat a bulb defect has occurred.A defective bulb placesyour safety at risk becauseit is easier for other users tooversee the motorcycle.Replace defective bulbs assoon as possible; always carry acomplete set of spare bulbs ifpossible.The bulb is pressurised andcan cause injury if damaged.Wear protective goggles andgloves when changing bulbs.The types of bulb fitted toyour motorcycle are listedin the section entitled "Technicaldata".ation from the bulb. This leadsto overheating and shortens thebulb's operating life.Replacing low-beamheadlight bulbIf it is not standing firmly,the motorcycle could topplein the course of the operationsdescribed below.Always make sure that themotorcycle is stable and firmlysupported.Make sure the ground is leveland firm and place the motorcycleon its stand.Switch off the ignition.Turn the handlebars to theleft to facilitate access.Turn cover 1 counter-clockwiseand remove it.Do not touch the glass ofnew bulbs with your fingers.Use a clean, dry cloth to holdthe bulbs when handling them.Dirt deposits, in particular oil andgrease, interfere with heat radi-Disconnect plug 2.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!