Rider's Manual K 1200 S - K100.biz

z Accessoriesthe on-board power supply systemis minimised, the supply tothe power socket is cut off approximately15 minutes after theignition is switched off, and it isalso temporarily interrupted duringthe start procedure.Cable routingThe cables from the power socketto the auxiliary device must berouted in such a way that they:Do not impede the riderDo not restrict or obstruct thesteering angle and handlingcharacteristicsCannot be trappedIncorrectly routed cablescan impede the rider.Route the cables as describedabove.LuggageCorrect loadingOverloading and imbalancedloads can adverselyaffect the motorcycle's handling.Do not exceed the permissiblegross weight and be sure tocomply with the instructions onloading.Set spring preload, dampingcharacteristic and tyre pressuresto suit total weight.Adjust the spring preload forrear wheel ( 58)Check the tyre pressure( 62)Adjust the damping for rearwheel ( 59)Ensure that the case volumeson the left and right are equal.Make sure that the weight isuniformly distributed betweenright and left.Pack heavy items at the bottomand toward the inboardside.Note the maximum permissiblepayload of the cases and thespeed limit for riding with caseson the motorcycle.Payload of caseswith OA Case:≤8 kgMaximum permissiblespeed for riding withcases fitted to the motorcyclewith OA Case:≤180 km/hNote the maximum permissiblepayload of the tank rucksackand the speed limit for ridingwith a tank rucksack on themotorcycle.789