Rider's Manual K 1200 S - K100.biz

z Status indicatorsThe motorcycle has not yet acceleratedpast the threshold ofapproximately 30 km/h. TheRDC sensors do not start transmittingsignals until the motorcyclereaches a speed above thisthreshold ( 84).Increase speed above thisthreshold and observe the RDCreadings. Assume that a permanentfault has not occurredunless the 'General' warninglight comes on to accompanythe symptoms. Under thesecircumstances:Have the fault rectified by aspecialist workshop, preferablyan authorised BMW Motorraddealer.Wireless communication with theRDC sensors has been disrupted.Possible causes include radiocommunicationsystems operatingin the vicinity and interferingwith the link between the RDCcontrol unit and the sensors.Move to another location andobserve the RDC readings. Assumethat a permanent faulthas not occurred unless the'General' warning light comeson to accompany the symptoms.Under these circumstances:Have the fault rectified by aspecialist workshop, preferablyan authorised BMW Motorraddealer.Sensor defective or systemerrorGeneral warning light showsyellow.Tyre symbol appears onthe display."--" or"-- --" appears onthe display.Motorcycle is fitted with wheelsnot equipped with RDC sensors.Fit wheels and tyres equippedwith RDC sensors.One or two RDC sensors havefailed.Have the fault rectified by aspecialist workshop, preferablyan authorised BMW Motorraddealer.A system error has occurred.Have the fault rectified by aspecialist workshop, preferablyan authorised BMW Motorraddealer.Battery of tyre-pressuresensor weakGeneral warning light showsyellow.RDC! appears on the display.This error message appearsonly briefly after the preridecheck completes.337