Rider's Manual K 1200 S - K100.biz

456z OperationPress and hold down ASC button1.ASC symbol shows constantly.Release the ASC button withinthree seconds.ASC symbol continues toshow.The ASC function is deactivated.Activating ASC functionPress and hold down ASC button1.ASC symbol no longershows; if self-diagnosis hasnot completed the ASC warninglight starts flashing.Release the ASC button withinthree seconds.The ASC symbol remainsoff or continues to flash.The ASC function is activated.Instead of pressing the ASCbutton, you have the option ofswitching the ignition off andthen on again.An ASC fault has occurredif the ASC warning lightshows when the motorcycle acceleratesto a speed in excessof 10 km/h after the ignition wasswitched off and then on again.ClutchAdjusting clutch leverIf the position of the clutchfluid reservoir is changed,air can enter the clutch system.Do not twist the handlebar fittingor the handlebars.Attempting to adjust theclutch lever while riding themotorcycle can lead to accidents.Do not attempt to adjust theclutch lever unless the motorcycleis at a standstill.