Rider's Manual K 1200 S - K100.biz

8112z MaintenanceAlign clamp 3 on the silencerwith mark A (arrow) on oxygensensor B.Tighten clamp 3 on the silencerto the specified tighteningtorque.35 NmSilencer to manifoldIf the gap between the rearwheel and the silencer istoo small, the rear wheel canoverheat.The gap between the rear wheeland the silencer must be at least10 mm.Tighten screw 4 for the bracketof the silencer in the rearfootrest to the specified torque.Push silencer cover 2 withguides A into retainers B.22 NmSilencer to rear footrestInstall screw 1 in silencer cover2.Remove the rear wheel stand,if installed beforehand.