Rider's Manual K 1200 S - K100.biz

z MaintenanceCarefully route the ABS sensorcable. Make sure that the ABSsensor cable is clipped intoholders 8.ceptible, and repeat this operationseveral times.with OA Centre stand:Make sure the ground is leveland firm and place the motorcycleon its centre stand.8109Install securing screws 3 onleft and right and tighten tospecified tightening torque.Front brake caliper towheel carrier30 NmRemove the adhesive tapefrom the wheel rim.Firmly pull the handbrake leveruntil the pressure point is per-Install the front mudguard andinstall screws 1 on left andright.Remove the rear wheel stand,if installed beforehand.Removing rear wheelPlace the motorcycle on anauxiliary stand; BMW Motorradrecommends the BMW Motorradrear-wheel stand.Install the rear-wheel stand( 114)Remove screw 1 from silencercover 2.Pull the cover to the rear toremove.