Rider's Manual K 1200 S - K100.biz

8120Switch off the ignition.Make sure the ground is leveland firm and place the motorcycleon its stand.Switch off the ignition.Remove the seat ( 63)z MaintenancePull off the connector 1 beneaththe headlight.Remove bulb holder 2 from theheadlight housing by turning itcounter-clockwise.Remove bulb 3 from the bulbholder.Replace the defective bulb.Bulb for parking lightW5W / 12 V / 5 WInstall bulb 3 in bulb socket 2.Turn the bulb socket clockwiseto install it in the headlighthousing.Connect plug 1 beneath theheadlight.Replacing brake light andrear light bulbIf it is not standing firmly,the motorcycle could topplein the course of the operationsdescribed below.Always make sure that themotorcycle is stable and firmlysupported.Remove screw 1.