Rider's Manual K 1200 S - K100.biz

z Maintenance8123Remove the bulb holder 2 fromthe bulb housing by turning itcounter-clockwise.Remove bulb 3 from the bulbholder.Replace the defective bulbBulbs for flashing turnindicators, frontW16W / 12 V / 16 WInstall bulb 3 in bulb socket 2.Turn the bulb socket clockwiseto install it in the bulb housing.Seat the bulb housing in themirror shell.Install screw 1.Replacing rear turnindicator bulbsIf it is not standing firmly,the motorcycle could topplein the course of the operationsdescribed below.Always make sure that themotorcycle is stable and firmlysupported.Make sure the ground is leveland firm and place the motorcycleon its stand.Switch off the ignition.