5000 Series Indicators Instruction Manual - Scale Manuals

5000 Series IndicatorsEN-213.4.4 GraduationSet the scale readability.0.00001, 0.00002, 0.00005, 0.0001, 0.0002, 0.0005, 0.001, 0.002, 0.005, 0.01, 0.02,0.05, 0.1, 0.2, 0.5, 1, 2, 5, 10, 20, 50, 100, 200, 500, 1000.NOTE: Graduation settings are limited to values from Capacity divided by 1000 to Capacity divided by30000. Therefore, not all settings are available for each capacity.•••NOTE: If dUAL was selected in the rANGE menu item, the Graduation setting defines the Range 1 graduation.The Range 2 graduation is automatically defined as one step greater than the Graduation setting. Forexample, if Graduation is set to 0.001, the Range 2 graduation becomes 0.002.NOTE: Range 2 graduation is retained even under half capacity until the scale returns to zero.3.4.5 Power On UnitSet the unit of measures displayed at startupAUtO = last unit in use when turned offPWr.UN kg = kilogramsPWr.UN g = gramsPWr.UN lb = poundsPWr.UN oz = ouncesPWr.UN lb:oz = pound ouncesPWr.UN t = tonnesPWr.UN C = custom unitNOTE: Units oz, lb:oz and C (custom) will not be valid as Power On units when Range is set to Dual. Thenext available unit will be displayed instead3.4.6 Zero RangeSet the percentage of scale capacity that may be zeroed.2% = zero up to 2 percent of capacity100% = zero up to full capacity