TL-SL3428_V3_User_Guide - TP-Link

Select ACL:S-Mirror:S-Condition:Redirect:Select the ACL for configuration in the policy.Select S-Mirror to mirror the data packets in the policy to the specificport.Select S-Condition to limit the transmission rate of the data packets inthe policy.• Rate: Specify the forwarding rate of the data packets those matchthe corresponding ACL.• Out of Band: Specify the disposal way of the data packets thoseare transmitted beyond the rate.Select Redirect to change the forwarding direction of the data packetsin the policy.• Destination Port: Forward the data packets those match thecorresponding ACL to the specific port.10.4 Policy BindingPolicy Binding function can have the policy take its effect on a specific port/VLAN. The policy willtake effect only when it is bound to a port/VLAN. In the same way, the port/VLAN will receive thedata packets and process them based on the policy only when the policy is bound to theport/VLAN.The Policypages.Binding can be implemented on Binding Table, Port Binding and VLAN Binding10.4.1 Binding TableOn this page view the policy bound to port/VLAN.Choose the menu ACL→Policy Binding→Binding Table to load the following page.Figure 10-12 Binding TableThe following entries are displayed on this screen:‣ Search OptionShow Mode:Select a show mode appropriate to your needs.‣ Policy Bind TableSelect:Select the desired entry to delete the corresponding binding policy.133