TL-SL3428_V3_User_Guide - TP-Link

Figure 10-14 Bind the policy to the VLANThe following entries are displayed on this screen:‣ VLAN-Bind ConfigPolicy Name:VLAN ID:Select the name of the policy you want to bind.Enter the ID of the VLAN you want to bind.‣ VLAN-Bind TableIndex:Policy Name:VLAN ID:Direction:Displays the index of the binding policy.Displays the name of the binding policy.Displays the ID of the VLAN bound to the corresponding policy.Displays the binding direction.Configuration Procedure:Step Operation Description1 Configure effectivetime-rangeRequired. On ACL→Time-Range configuration pages,configure the effective time-ranges for ACLs.2 Configure ACL rules Required. On ACL→ACL Config configuration pages,configure ACL rules to match packets.3 Configure Policy Required. On ACL→Policy Config configuration pages,configure the policy to control the data packets those matchthe corresponding ACL rules.4 Bind the policy to theport/VLANRequired. On ACL→Policy Binding configuration pages,bind the policy to the port/VLAN to make the policy effectiveon the corresponding port/VLAN.10.5 Application Example for ACL‣ Network Requirements1. The manager of the R&D department can access to the forum of the company and the Internetwithout any forbiddance. The MAC address of the manager is 00-46-A5-5D-12-C3.2. The staff of the R&D department can not access to the Internet during the working time but canvisit the forum all day.135