TL-SL3428_V3_User_Guide - TP-Link

Note:The amount of Engine ID characters must be even.12.1.2 SNMP ViewThe OID (Object Identifier) of the SNMP packets is used to describe the managed objects of theswitch, and the MIB (Management Information Base) is the set of the OIDs. The SNMP View iscreated for the SNMP management station to manage MIB objects.Choose the menu SNMP→SNMP Config→SNMP View to load the following page.Figure 12-4 SNMP ViewThe following entries are displayed on this screen:‣ View ConfigView Name:MIB Object ID:View Type:Give a name to the View for identification. Each View caninclude several entries with the same name.Enter the Object Identifier (OID) for the entry of View.Select the type for the view entry. Include: The view entry can be managed by the SNMPmanagement station. Exclude: The view entry can not be managed by the SNMPmanagement station.‣ View TableSelect:View Name:View Type:MIB Object ID:Select the desired entry to delete the corresponding view. Allthe entries of a View will be deleted together.Displays the name of the View entry.Displays the type of the View entry.Displays the OID of the View entry.169